Lancashire · England
Bath chip & crack repair in Holme, Lancashire
Bath repair for Holme, without a refit. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Impact holes in acrylic
- Scuffs and scratches in the surface
Bath repair in Holme without replacing anything
A typical bath repair is a few hours’ work, and you can generally bathe again the next day. There’s no need to book a plumber or tiler, because the bath does not move. We work on roll-top & freestanding, pressed steel enamel and cast iron enamel, and people most frequently call us about rust spots around the plughole and chips on the rim or sides.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Holme (LA6)
- Area hub
- Lancashire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Holme
We carry out planned and one-off repairs for housing associations and facilities teams in Lancashire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Covering Holme
Holme is about 8 miles south of Kendal, in Lancashire. Customers in Holme get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Our technicians cover all 482 towns and villages in Lancashire, from the larger towns to small villages. Our nearest city page is Manchester, about 54 miles away.
Our visits in LA6 are booked in the same way as anywhere else. From Station Road, Hillside and Trinity Drive or a nearby road, we can come to you. Other places close to Holme include Hale (1 mile west), Beetham (2 miles west), Ackenthwaite (2 miles north-west), Slack Head (2 miles west) and Milnthorpe (2 miles north-west). Further out, we also cover Lancaster (11 miles south), Morecambe (11 miles south-west), Heysham (13 miles south-west), Westfield War Memorial Village (11 miles south), Sandylands (12 miles south-west) and Carnforth (6 miles south).
Landmarks near Holme
Typical jobs here are in homes near Holme Primary School, Smithy Inn and Dallam School. The closest station to Holme is Silverdale station, roughly 3.9 miles south-west. A little further out are Mourholme (4.1 miles south). Green spaces nearby include Hawes Water and Clawthorpe Fell.
What we cannot put right
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Acrylic cracks with no access behind them
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Holme
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- How much damage there is
- Where the damage is and how we get to it
- What kind of damage it is
- What the surface is made of
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Natural light rather than flash
If you’re in Holme and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
How to care for the repair
After the repair has cured, a few habits help it last:
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a few hours for most jobs. The room is left tidy and ready to use once it has cured.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the following day.
How to prepare
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
Ask for a price
Most customers in Holme get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
FAQs for Holme
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can rust on a bath be repaired?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Is a repair better than a new one?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
How long does the repair take to cure?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Should you replace it?
Swapping a damaged bath for a new one normally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- One price list for the whole UK
- Usually one visit, start to finish
- Free fixed quotes from pictures
- We leave the room as we found it
Take a look at our full price list and bath cost comparison.
Also near Holme
Other services in Holme
Signs you need bath repair in Holme
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
The things clients generally mention when they call include:
- Scuffs and scratches in the surface
- Holes from dropped items
- A cracked acrylic bath
- Damage beneath the taps
What to look for in a quote
- What aftercare is recommended
- Who will actually do the work
- What preparation is included
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
