Cumbria · England
Bath chip & crack repair in Ackenthwaite, Cumbria
Bath repair in and around Ackenthwaite: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Chips on the rim or sides
Should you replace it?
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Ackenthwaite clients choose us
- We leave the room as we found it
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Colour mixed on the day to match
See our pricing and resurfacing vs replacement cost guide.
Bath repair in Ackenthwaite, done in place
A typical bath repair is a few hours’ work, and you can generally bathe again the next day. There is no need to book a plumber or tiler, because nothing is disconnected. We’re frequently asked to fix rust spots around the plughole and scuffs and scratches in the surface, on acrylic, whirlpool & spa baths and roll-top & freestanding.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Ackenthwaite (LA7)
- Region
- Cumbria
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Other services in Ackenthwaite
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Have new chips seen to early
- Ensure an acrylic bath is firm underfoot
- Do not scrub with anything abrasive
- Cover the bath during DIY or decorating
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Landlords, agents and businesses in Ackenthwaite
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
When to call us in Ackenthwaite
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Most people get in touch after spotting one of these:
- A chipped rim or side
- Chips caused by builders
- Hairline or through cracks in acrylic
- Chips under the taps
What to look for in a quote
- Whether there are any call-out or travel charges
- When it can be used again
- How long the guarantee is and what it covers
- Aftercare advice
When a repair is not the answer
A repair is not always the answer, and we will tell you before we start. Repairs will not solve:
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours, depending on the damage. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the day after.
How to prepare
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Your questions about bath repair in Ackenthwaite
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
How long does the repair take to cure?
Generally within a day, though it depends on what we’ve done.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Ackenthwaite and nearby
Ackenthwaite is about 7 miles south of Kendal, in Cumbria. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Ackenthwaite is one of 438 places in Cumbria where we work. We work right across the region, from Ackenthwaite to Manchester (about 56 miles away).
Here we cover the LA7 postcode area. We regularly work on streets such as Kirkgate Lane, Haverflatts Lane and Chestnut Way and the roads around them. If you’re just outside Ackenthwaite, we cover Milnthorpe (1 mile west), Rowell (1 mile north-east), Heversham (1 mile north-west), Leasgill (2 miles north-west) and Beetham (2 miles south-west). We also work in nearby towns such as Kendal (7 miles north), Ulverston (14 miles west), Windermere (12 miles north-west), Grange-over-Sands (7 miles south-west), Bowness-on-Windermere (11 miles north-west) and Sedbergh (11 miles north-east).
Near you in Ackenthwaite
Around Ackenthwaite, we work in homes near Dallam School, Milnthorpe Primary School and St Thomas' Church. The closest station to Ackenthwaite is Arnside station, roughly 3.4 miles south-west of the centre. Nearby you will also find Sizergh Castle (3.8 miles north) and Westmorland General Hospital (5.4 miles north). Green spaces nearby include Clawthorpe Fell and Hawes Water.
How we price bath repair
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- What the surface is made of
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
- Your postcode, so we can check dates
Most customers in Ackenthwaite get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
