Surrey · England
Bath chip & crack repair in Holmwood Corner, Surrey
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Holmwood Corner. Free, fixed quotes from your pictures.
- Repairs from £95
- Damage beneath the taps
- Chips along the edge of the bath
Where we work around Holmwood Corner
Holmwood Corner is about 3 miles south of Dorking, in Surrey. Our technicians come to clients in Holmwood Corner, so nothing has to leave your home. We cover all 395 towns and villages across Surrey, from the larger towns to small villages. Our jobs stretch from Holmwood Corner to London (24 miles away).
Our technicians cover all of RH5 and the streets around it. We also travel to South Holmwood (1 mile north-west), Beare Green (1 mile south), Coldharbour (2 miles west), Capel (3 miles south) and Friday Street (3 miles west). We also work in nearby towns such as Guildford (12 miles west), Woking (14 miles north-west), Epsom (11 miles north), Horley (7 miles east), Redhill (7 miles north-east) and Ewell (12 miles north).
Landmarks near Holmwood Corner
We visit homes around The Weald CofE Primary School, Church of St Mary Magdalene and Inholms Clay Pit, among other places. There’s a railway station in Holmwood Corner itself: Holmwood station. Further afield, we also cover the area around Mesolithic Museum (3.8 miles west) and Betchworth Castle (3.6 miles north). Not far away are Leith Hill and Vann Lake.
Bath repair at your home in Holmwood Corner
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you are dealing with a kit repair that didn’t last and a cracked acrylic bath, we can help, on cast iron enamel, roll-top & freestanding and acrylic alike.
You get a one-year guarantee, the same in Holmwood Corner as everywhere else we work.
- Area
- Holmwood Corner (RH5)
- Region
- Surrey
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Get a dripping tap fixed promptly
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you are working above it
- Clean with warm water and a mild detergent
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Places near Holmwood Corner
Also in Holmwood Corner
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we look at:
- The material
- Access to the area
- Doing more than one item at once
- The colour and finish to match
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Photographing the damage takes a minute. Try to send:
- The material, if you know it
- Natural light rather than flash
- Details of any past repairs
- Something in shot to show the size
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Do you need bath repair in Holmwood Corner?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Customers generally contact us about:
- A kit repair that didn’t last
- Chips under the taps
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Before you book anyone
- What preparation is included
- A fixed price, and whether VAT is included
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
Honest limits
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Landlords, agents and businesses in Holmwood Corner
For anyone letting property in or around Holmwood Corner, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Your questions about bath repair in Holmwood Corner
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes two to three hours for most chips. If anything looks different from your photos, we’ll talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
- Tell us if there are stairs or a lift
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Read more
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
