Surrey · England
Bath chip & crack repair in Coldharbour, Surrey
Bath repair in Coldharbour without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- An old repair that has yellowed or come loose
- A cracked acrylic bath
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- A dripping tap stains enamel, so fix it early
- Stick to mild cleaners and a soft cloth
- Store metal items away from the bath
- Check that an acrylic bath does not move when you stand in it
There’s nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Bath repair in Coldharbour without replacing anything
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Whether it’s scuffs and scratches in the surface and chips under the taps, we can help, on roll-top & freestanding, whirlpool & spa baths and acrylic alike.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Coldharbour (RH5)
- County
- Surrey
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Coldharbour
Other services in Coldharbour
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. The price reflects the work involved, not where you live. The full price is agreed before you book.
What you get with us
- Honest advice, even when it means no job
- One visit for most repairs
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
Read our prices page and bath cost comparison.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
- A steel bath rusted through
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Prices and what affects them
Repairs from £95. We do not charge extra for travel to Coldharbour. The price depends on:
- What kind of damage it is
- Access to the area
- How much damage there is
- How many items we do on one visit
Our prices are the same across the UK, so there is no premium for Coldharbour. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- A close-up of the damage, in focus
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
When to call us in Coldharbour
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
These are the problems we’re asked about most:
- A hole punched through by something heavy
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
- Chips along the edge of the bath
Comparing quotes
- What aftercare is recommended
- What protection goes down before work starts
- Whether they match the colour on site
- What prep work is covered
What happens on the day
We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Getting a price
If you are in Coldharbour and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Coldharbour and nearby
Coldharbour is about 4 miles south of Dorking, in Surrey. From the centre of Coldharbour to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Coldharbour is one of 395 towns and villages in Surrey where we work. Our jobs stretch from Coldharbour to London (about 25 miles away).
We work across RH5. Nearby, we also work in Abinger Bottom (2 miles north-west), South Holmwood (2 miles north-east), Holmwood Corner (2 miles east), Friday Street (2 miles north-west) and Beare Green (2 miles east). We also work in nearby towns such as Guildford (10 miles north-west), Woking (13 miles north-west), Epsom (11 miles north), Horley (8 miles east), Redhill (9 miles north-east) and Ewell (13 miles north).
Around Coldharbour
Around Coldharbour, we work in homes near Plough Inn, Christ Church and Wotton and Abinger Commons, among other places. For rail, the closest station is Holmwood station, about 1.6 miles east of the centre. A little further out are Mesolithic Museum (2.6 miles north-west) and Abinger Castle (2.6 miles north-west). For a walk, there’s Vann Lake and Leith Hill.
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Your questions about bath repair in Coldharbour
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
Which areas do you work in?
The whole UK, including all of Surrey. Send your postcode with your photos and we will offer you dates.
What happens after I send photos?
We review the photos and send a fixed quote.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Are there extra charges for Coldharbour?
No. Our quotes include travel, and we charge the same wherever you are.
About our accreditations · Every repair comes with a one-year guarantee.
