Surrey · England
Bath Repair for Holt Pound homes
Our technicians come to Holt Pound for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Cracks in an acrylic bath
- Chips along the edge of the bath
What we are called out for in Holt Pound
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
Get in touch if you’ve noticed:
- A chipped rim or side
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
- Scuffs and scratches in the surface
Comparing quotes
- A fixed quote, and whether VAT is included
- What preparation is included
- Whether the price covers travel
- When it can be used again
Bath repair at your home in Holt Pound
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for deep scratches in acrylic and cracks in an acrylic bath, on acrylic, cast iron enamel and whirlpool & spa baths.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Holt Pound (GU10)
- County
- Surrey
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Holt Pound
Also in Holt Pound
Covering Holt Pound
Holt Pound is about 2 miles south-west of Farnham, in Surrey. From the centre of Holt Pound to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 395 places in Surrey, from the larger towns to small villages. We work right across the region, from Holt Pound to London (39 miles away).
Here we cover the GU10 postcode area. Jobs here include addresses on Fullers Road and The Wickets. We also travel to Rowledge (1 mile east), Wrecclesham (1 mile north-east), Boundstone (1 mile east), Bucks Horn Oak (1 mile south-west) and Shortheath (1 mile north-east). Within a short drive, we also cover Guildford (12 miles east), Woking (14 miles north-east), Camberley (11 miles north-east), Frimley (10 miles north-east), Haslemere (8 miles south-east) and Ash (6 miles north-east).
What’s near Holt Pound
We visit homes around Weydon School, Rowledge Church of England Controlled Primary School and Saint James. You will also find Underdown nature reserve (1.1 miles north-east), Weydon School (1.4 miles north-east) and The Cherry Tree pub (0.5 miles south-east). For rail, the closest station is Bentley (Hampshire) station, about 1.5 miles west of the centre. Other landmarks nearby include Powderham Castle (2.2 miles north) and Chase Community Hospital (5.6 miles south). The countryside around Holt Pound includes Farnham Heath and Beacon Hill.
How we price bath repair
Prices start from £95. We charge the same across the UK, including Holt Pound. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- The material
- Doing more than one item at once
- Unusual colours or finishes
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
- Something in shot to show the size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
What we can’t put right
We will not take on work that will not last, so these are the limits:
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
Common questions in Holt Pound
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Which areas do you work in?
We cover the entire UK, including Holt Pound and the rest of Surrey. Send your postcode with your photos and we will confirm dates.
Do you come to Holt Pound?
We do. Repair technicians travel to Holt Pound from across the region, with no extra charge for travel.
Is a holed acrylic bath repairable?
Generally. Photos of the hole and the underside help us check.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Work for landlords and builders
Landlords, letting agents and housing providers in Holt Pound use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Keep abrasive pads and gritty cleaners away from the bath
- Clean with warm water and a mild detergent
- Cover the bath during DIY or decorating
- Do not leave razors or cans standing in the bath
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
What happens on the day
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Tell us about parking, stairs or access
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
