Surrey · England

Bath Repair in Rowledge

Bath repair for Rowledge, without a refit. Get a fixed quote from your photos, then book a visit.

  • Repairs from £95
  • A chipped rim or side
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Rowledge

Bath repair in Rowledge, done in place

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. We regularly repair pressed steel enamel, whirlpool & spa baths and cast iron enamel, and the jobs we see most are chips along the edge of the bath and an old repair that has yellowed or come loose.

Big or small, it’s backed by a one-year guarantee in Rowledge and across Surrey.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Rowledge (GU10)
Area hub
Surrey
Cover
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

What your bath is made of matters

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Where we work around Rowledge

Rowledge is about 2 miles south-west of Farnham, in Surrey. Across the GU10 area, we come to you. Rowledge is one of 395 places in Surrey we cover. We work right across the region, from Rowledge to London (about 38 miles away).

Every address in GU10 is covered, from the main roads to the quietest streets. We regularly work on streets such as High Street, Chapel Road and Bell Lane. Close by, we cover Holt Pound (1 mile west), Boundstone (1 mile north-east), Wrecclesham (1 mile north), Shortheath (1 mile north-east) and Batt's Corner (1 mile south). We also work in nearby towns such as Guildford (12 miles east), Woking (14 miles north-east), Camberley (11 miles north), Frimley (10 miles north-east), Haslemere (8 miles south-east) and Cranleigh (15 miles east).

Local landmarks in Rowledge

Locally, our jobs take us to homes close to Saint James, The Hare and Hounds pub and Rowledge Church of England Controlled Primary School, among other places. Also close by are Underdown nature reserve (0.8 miles north-east), Weydon School (1.3 miles north) and Edgeborough School (1.2 miles east). The closest station to Rowledge is Bentley (Hampshire) station, about 2 miles west. Well-known places in the area include Chase Community Hospital (5.6 miles south) and Museum of Farnham (2.2 miles north). For a walk, there is Beacon Hill and Farnham Heath.

Map of Rowledge © OpenStreetMap contributors

What we’re called out for in Rowledge

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.

Send us a picture if you notice any of these:

  • A failed DIY repair that’s discoloured or lifting
  • Hairline or through cracks in acrylic
  • Chips on the rim or sides
  • A hole punched through by something heavy

Questions to ask before you book

  • How the room is protected while they work
  • Whether the price covers travel
  • Whether they match the colour on site
  • What aftercare is recommended

10 questions to ask before you book

Landlords, agents and businesses in Rowledge

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

The process

Arrival times are agreed in advance, so you know when to expect us. On site, it takes a few hours, depending on the damage in most cases. We leave the room clean and ready to use once it has cured.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the day after.

How to prepare

  • Mention any parking restrictions or tricky access
  • Move bottles, mats and clutter away from the area
  • Let us know if it has been repaired before

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.

Send pictures for a quote

Advice

When we would advise against a repair

Before you book, it’s worth knowing the limits:

  • Cracks in acrylic we cannot reach from underneath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A steel bath rusted through

Send us pictures and we will tell you honestly before booking.

What we work on

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel

Questions from Rowledge

How long does the repair take to cure?

Typically the next day. We will tell you the exact curing time when we finish.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can pets and children be at home?

Just keep them out of the work area. We will let you know when it’s safe to use again.

How do I get a price for bath repair in Rowledge?

Repairs from £95. We give a fixed quote from your photos. Send a close-up and a photo of the whole item with your GU10 postcode.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Do you charge for travel?

There is no separate call-out charge. Your fixed price includes everything.

Will I be able to see the repair?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

Aftercare tips

It’s all simple stuff, just a few sensible habits:

  • Give the bath a quick rinse after use
  • Put a towel in the bath if you’re working above it
  • Have new chips seen to early
  • Get a dripping tap fixed promptly

Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.

How we price bath repair

Prices start from £95. There are no hourly rates or hidden extras. The price depends on:

  • The type of damage
  • Access to the area
  • How many areas need work
  • The material and finish

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

You can generally get a fixed quote without us visiting. To help us price it:

  • A close-up of the damage, in focus
  • A wider photo showing the entire bath
  • The material, if you know it
  • Good light, ideally daylight, without flash glare

Most clients in Rowledge get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.