Dumfries and Galloway · Scotland
Bath chip & crack repair in Holywood, Dumfries and Galloway
Chip and crack repairs to enamel, acrylic and cast iron baths in Holywood, carried out at your home and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- A chipped rim or side
Do you need bath repair in Holywood?
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex.
Look out for these signs:
- Cracks in an acrylic bath
- Rust by the waste and overflow
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
What your quote should include
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- How to look after the finish
- How long it needs to cure
Bath repair in Holywood without replacing anything
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Common call-outs are for a failed DIY repair that’s discoloured or lifting and chips under the taps, in pressed steel enamel, cast iron enamel and whirlpool & spa baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Holywood (DG2)
- Region
- Dumfries and Galloway
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Holywood
Also in Holywood
What affects the price in Holywood
Prices start from £95. There’s no area surcharge for Holywood. The price reflects:
- How many areas need work
- Unusual colours or finishes
- Doing more than one item at once
- The type of damage
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- Natural light rather than flash
- Where you are, by postcode
- Any details about the material
- Something in shot to show the size
Most customers in Holywood get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
- Tell us about parking, stairs or access
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Common questions in Holywood
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Dumfries and Galloway.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
What happens after I send pictures?
We review the photos and send a fixed quote with dates.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Holywood customers choose us
- One price list for the whole UK
- Straight answers about what a repair can do
- We leave the room as we found it
- Colour mixed on the day to match
Take a look at our pricing and guide to resurfacing and replacement costs.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About Holywood
Holywood is about 3 miles north-west of Dumfries, in Dumfries and Galloway. From the centre of Holywood to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 138 towns and villages across Dumfries and Galloway. You can also see our page for Glasgow, about 58 miles away.
Jobs in DG2 work the same way as everywhere else we cover. Streets in the area include School Road and Dercongal Road, all of which we cover. We also cover the places around Holywood: Newbridge (1 mile south), Newbridge Drive (1 mile south-east), Kirkton (2 miles north-east), Terregles (2 miles south-west) and Locharbriggs (2 miles east). Within a short drive, we also cover Lockerbie (12 miles east), Dalbeattie (14 miles south-west), Heathhall (3 miles east), Lochmaben (8 miles east), Troqueer (3 miles south-east) and Thornhill (11 miles north-west).
Local landmarks in Holywood
Our customers here include homes close to Holywood Parish Church And Churchyard and Maxwelltown High School, among other places. Holywood’s nearest station is Dumfries station, about 2.6 miles south-east. A little further out are Dumfries and Galloway Royal Infirmary (3.6 miles south-east) and Dalswinton Castle (2.7 miles north). The countryside around Holywood includes Carse Loch.
Aftercare tips
Once the work has cured, treat it gently:
- Keep abrasive pads and gritty cleaners away from the bath
- Get any new chip repaired before it rusts
- Rinse it down after each bath
- Check that an acrylic bath doesn’t move when you stand in it
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
