Norfolk · England
Bath chip & crack repair in Homersfield, Norfolk
Fixed-price bath repair in Homersfield and the surrounding area, normally in one visit.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Chips on the rim or sides
How we handle bath repair in Homersfield
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. We work on acrylic, whirlpool & spa baths and roll-top & freestanding, and the jobs we see most are damage done while the bathroom was being fitted and deep scratches in acrylic.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Homersfield (IP20)
- Area hub
- Norfolk
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Homersfield
Do you cover the whole of Norfolk?
We cover the entire UK, including Homersfield and the rest of Norfolk. Just include your postcode and we will confirm dates.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When can I have a bath again?
Generally within a day, depending on the repair.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Places near Homersfield
What else we do in Homersfield
Honest limits
Before booking, it’s worth knowing the limits:
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath worn all over, where resurfacing makes more sense
Send us photos and we’ll tell you honestly before booking.
What we work on
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
What we do, step by step
You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It usually takes a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Make sure the room can be ventilated
- Ensure the area is dry
- Tell us about parking, stairs or access
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- How many areas need work
- Whether we combine several jobs
- Access to the area
- The type of damage
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- What it’s made of, if you know
- One picture of the entire bath
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Where we work around Homersfield
Homersfield is about 15 miles south-east of Wymondham, in Norfolk. Jobs in Homersfield are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover 797 places in Norfolk, from the larger towns to small villages.
Postcode districts we cover here: IP20. If you are just outside Homersfield, we cover Wortwell (1 mile south-west), Low Street (1 mile south-west), St Cross South Elmham (1 mile south-east), Alburgh (1 mile north-west) and Redenhall (1 mile south-west). Within a short drive, we also cover Norwich (15 miles north), Wymondham (15 miles north-west), Thorpe St Andrew (15 miles north), Norwich Lanes (15 miles north), Hethersett (15 miles north-west) and Heigham (15 miles north).
Landmarks near Homersfield
Locally, our jobs take us to homes close to Church of St Mary and The Black Swan pub, among other places. Further afield, we also cover the area around Harleston Museum (2.8 miles south-west) and Hawkers Hall (2.2 miles west). Open spaces near Homersfield include Homersfield Lake and Winks Meadow.
When to call us in Homersfield
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
You may need us if you’ve spotted:
- Chips under the taps
- Deep scratches in acrylic
- A cracked acrylic bath
- Rusty patches near the plughole
What to look for in a quote
- What happens if the damage is worse than the pictures show
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- How long it needs to cure
Repairing versus replacing in Homersfield
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- One price list for the entire UK
Read our full price list and guide to resurfacing and replacement costs.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Rinse the bath after use, especially in hard water areas
- If an acrylic bath flexes, have its feet adjusted
- Fix dripping taps early to stop staining and limescale
- Don’t leave a fresh chip for long
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
