Worcestershire · England
Bath chip & crack repair in Honeybourne, Worcestershire
We travel to Honeybourne for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- An old repair that has yellowed or come loose
- A chip where the taps sit
Honeybourne: your questions answered
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Are there extra charges for Honeybourne?
There is no separate call-out charge. Your fixed quote includes everything.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
What happens next?
We come back with a fixed quote. You’re under no obligation.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Bath repair at your home in Honeybourne
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. If you are dealing with a kit repair that didn’t last and damage beneath the taps, we can help.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Area
- Honeybourne (WR11)
- Region
- Worcestershire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take a morning or an afternoon.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the following day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Open a window if you can
- Mention any earlier repairs or resurfacing
Ask for a price
Email us photos of the damage and one of the entire item, and tell us you’re in Honeybourne, and we will reply with a fixed quote.
Advice
Honeybourne and nearby
Honeybourne is about 5 miles east of Evesham, in Worcestershire. Our repair technicians come to homes and businesses in Honeybourne and nearby villages, so you don’t need to take anything anywhere. Honeybourne is one of 376 towns and villages in Worcestershire where we work. Our nearest city page is Birmingham, about 26 miles away.
We work across WR11 and the streets around it. Jobs here include addresses on Station Road, High Street and Clun Forest Way and the roads around them. We also travel to Cow Honeybourne (1 mile south-west), Bretforton (2 miles west), Weston-sub-Edge (2 miles south), Badsey (3 miles west) and Saintbury (3 miles south). We also work in nearby towns such as Redditch (15 miles north), Evesham (5 miles west), Pershore (11 miles west), Bengeworth (4 miles west), Matchborough (14 miles north) and Winyates (15 miles north).
Around Honeybourne
In Honeybourne, that means homes near Honeybourne First School and Church of St Ecgwin and the streets around them. There is a railway station in Honeybourne itself: Honeybourne station. Nearby you will also find Court Barn (3.9 miles south-east). For a walk, there’s Dover's Hill.
Common problems we fix in Honeybourne
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
It’s worth getting a quote if you see:
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
- Rust spots around the plughole
- A kit repair that didn’t last
Before booking anyone
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
Take a look at our pricing or guide to resurfacing and replacement costs.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Landlord and trade work in Honeybourne
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Honeybourne as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Aftercare tips
Simple care helps the repair last. Our advice:
- Fix dripping taps early to stop staining and limescale
- Do not leave razors or cans standing in the bath
- Have new chips seen to early
- Keep abrasive pads and gritty cleaners away from the bath
There is nothing special to do after a repair. Skip bleach and gritty creams and give it a rinse after each bath.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
Nearby places to Honeybourne
What else we do in Honeybourne
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair cannot fix:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
Send us pictures and we will tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
