Worcestershire · England
Bath Re-enamelling for Honeybourne homes
Bath re-enamelling in and around Honeybourne: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
How we handle bath re-enamelling in Honeybourne
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Our repair technicians work on acrylic baths, basins & shower trays and pressed steel baths, and the jobs we see most are thin, worn enamel in places and an old resurfacing that’s failing.
You get a one-year guarantee, the same in Honeybourne as everywhere else we work.
- Location
- Honeybourne (WR11)
- Area hub
- Worcestershire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Honeybourne
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Repair dripping taps early
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Don’t let dyes or oils sit on the finish
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What happens on the day
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Make sure the area is dry
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The type of damage
- The size and number of damaged areas
- How hard the colour is to match
- Access to the area
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- Natural light rather than flash
- A clear, close picture of the problem area
- One picture of the whole bath
- The postcode, so we can plan the visit
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
What we can’t put right
In fairness, some problems need a different fix:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Materials we work on in Honeybourne
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
What we’re called out for in Honeybourne
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
People typically call us when they notice one of these:
- A dull, rough surface that won’t come clean
- An outdated colour you’d like to change
- Chips and rust in more than one place
- Thin, worn enamel in places
What to look for in a quote
- How changes to the job are handled
- The length of the guarantee and what it covers
- Who turns up on the day
- How soon you can use it again
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
Why us?
- We’ll tell you if it’s not worth repairing
- Everything repaired in place
- A year’s guarantee on all work
- Fixed prices from your photos
Take a look at our pricing or guide to resurfacing and replacement costs.
Places near Honeybourne
What else we do in Honeybourne
Honeybourne and the surrounding area
Honeybourne is about 5 miles east of Evesham, in Worcestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Honeybourne is one of 376 towns and villages in Worcestershire where we work. You can also see our page for Birmingham, about 26 miles away.
All of WR11 is within our area. From Station Road, High Street and Clun Forest Way or anywhere nearby, we can come to you. Neighbouring places we cover include Cow Honeybourne (1 mile south-west), Bretforton (2 miles west), Weston-sub-Edge (2 miles south), Badsey (3 miles west) and Saintbury (3 miles south). We also work in nearby towns such as Redditch (15 miles north), Evesham (5 miles west), Pershore (11 miles west), Bengeworth (4 miles west), Matchborough (14 miles north) and Winyates (15 miles north).
Near you in Honeybourne
Around Honeybourne, we work in homes near Honeybourne First School and Church of St Ecgwin. Honeybourne has its own railway station: Honeybourne station. Nearby you will also find Court Barn (3.9 miles south-east). Not far away are Dover's Hill.
About our accreditations · Every repair comes with a one-year guarantee.
