Devon · England
Bath Repair in Horrabridge
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Horrabridge and across Devon. Send pictures for a free, fixed quote.
- Repairs from £95
- Snagging damage from a refit
- Deep scratches in acrylic
FAQs for Horrabridge
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Is a holed acrylic bath repairable?
Usually. Send us a photo of the hole and one from under the bath if you can.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How invisible is a bath repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
How we handle bath repair in Horrabridge
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the following day. Whether it’s snagging damage from a refit and chips under the taps, we can help, whatever the material.
Every repair comes with our one-year guarantee, wherever you are in Devon.
- Location
- Horrabridge (PL20)
- County
- Devon
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Horrabridge
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Most people contact us after spotting something like this:
- Chips under the taps
- Damage done while the bathroom was being fitted
- Chips on the rim or sides
- Rusty patches near the plughole
Before booking anyone
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- How long it needs to cure
Our work in Horrabridge
Horrabridge is about 3 miles south-east of Tavistock, in Devon. We travel to homes and businesses in Horrabridge, so nothing has to leave your home. Horrabridge is one of 586 places in Devon we cover.
We work across the PL20 postcode area and the streets around it. From Station Road, South View and Graybridge Road or a nearby road, a technician can come to you. We also cover the places around Horrabridge: Yelverton (1 mile south-east), Walkhampton (1 mile east), Crapstone (1 mile south-west), Axtown (1 mile south) and West Devon (1 mile south). Within a short drive, we also cover Tavistock (3 miles north-west), Ivybridge (11 miles south-east), Ashburton (15 miles east), Buckfastleigh (14 miles east), South Brent (13 miles south-east) and Yealmpton (12 miles south).
Landmarks near Horrabridge
Typical jobs here are in homes near Church of St John the Baptist, Horrabridge Primary & Nursery School and London Inn. Horrabridge’s nearest station is Bere Alston station, about 4.7 miles west. Other landmarks nearby include Tavistock Hospital (3.6 miles north-west) and Yelverton Paperweight Centre (1.1 miles south). For a walk, there’s Berra Tor and Crazywell Pool.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Nearby places to Horrabridge
Also in Horrabridge
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Repairing versus replacing in Horrabridge
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- We leave the room as we found it
See our full price list and guide to resurfacing and replacement costs.
How to look after the repair
Aftercare is simple:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Put a towel in the bath if you’re working above it
- Fix dripping taps early to stop staining and limescale
- Ensure an acrylic bath is firm underfoot
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Have a window or extractor fan available
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Read more
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
