Dorset · England
Bath Repair in Hurn
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Hurn. Free, fixed quotes from your photos.
- Repairs from £95
- Chips along the edge of the bath
- A kit repair that didn’t last
Bath repair in Hurn without replacing anything
A damaged bath doesn’t have to mean a new bathroom. Our technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. We’re frequently asked to fix a kit repair that didn’t last and a chipped rim or side, across roll-top & freestanding, whirlpool & spa baths and acrylic.
A one-year guarantee comes as standard.
- Location
- Hurn (BH23)
- Area hub
- Dorset
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Hurn
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
These are the problems we are asked about most:
- Rust by the waste and overflow
- Chips along the edge of the bath
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
Questions to ask before booking
- Aftercare advice
- How the room is protected while they work
- What happens if the damage is worse than the pictures show
- If travel is included in the price
How to care for the repair
Once the work has cured, treat it gently:
- Fix dripping taps early to stop staining and limescale
- Get any new chip repaired before it rusts
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Why Hurn clients choose us
- One visit for most repairs
- No extra charge for your area
- A year’s guarantee on all work
- A fixed quote before booking
See our pricing and bath cost comparison.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Honest limits
We’ll always be straight with you, so here’s what a repair cannot fix:
- Leaking fittings, which need a plumber
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Our work in Hurn
Hurn is about 3 miles north-east of Bournemouth, in Dorset. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover all 462 towns and villages across Dorset.
Here we cover the BH23 postcode area. Whether you live on Moors Close and Avon Causeway or anywhere nearby, we can come to you. Other places close to Hurn include West Hurn (1 mile south-west), Avon Common (1 mile north), Merritown (1 mile west), Holdenhurst (1 mile south) and Blackwater (1 mile south-east). We also work in nearby towns such as Christchurch (4 miles south-east), Wimborne Minster (7 miles west), Verwood (7 miles north), Ferndown (4 miles north-west), Broadstone (8 miles west) and Corfe Mullen (9 miles west).
Around Hurn
Locally, our jobs take us to homes close to Bournemouth School for Girls and the streets around them. The closest station to Hurn is Christchurch station, about 3 miles south-east of the centre. A little further out are Christchurch Castle (3.5 miles south-east) and Castlepoint Shopping Centre (1.8 miles south-west). Not far away are St Catherine's Hill.
More services for Hurn
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Your questions about bath repair in Hurn
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Are there extra charges for Hurn?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Which areas do you work in?
Across the UK. Prices don’t change with location.
Is a holed acrylic bath repairable?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Do you work in Hurn?
Yes. We cover the entire UK and travel to Hurn. Send pictures and we’ll quote, or call 0345 017 0787.
What affects the price in Hurn
Prices start from £95. There’s no charge for travel to Hurn. The price depends on:
- What kind of damage it is
- Whether we combine several jobs
- The material
- Unusual colours or finishes
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed price
Two or three clear pictures are typically enough. It helps if you send:
- What it’s made of, if you know
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Details of any past repairs
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes a few hours, depending on the damage. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
