Oxfordshire · England
Bath Repair for Ipsden homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Ipsden. Free, fixed quotes from your photos.
- Repairs from £95
- Rusty patches near the plughole
- A kit repair that didn’t last
Ipsden and the surrounding area
Ipsden is about 8 miles north-west of Caversham, in Oxfordshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. We work in 443 places in Oxfordshire. Our jobs stretch from Ipsden to London (about 43 miles away).
Every address in OX10 is covered, from the main roads to the quietest streets. From The Street, Fir Close and Crabtree Corner or a nearby road, a technician can come to you. If you are just outside Ipsden, we cover Heath End (2 miles east), Checkendon (2 miles south-east), Woodcote (2 miles south), Nuffield (2 miles north-east) and Stoke Row (3 miles east). Further out, we also cover Oxford (14 miles north-west), Didcot (8 miles north-west), Abingdon-on-Thames (12 miles north-west), Thame (14 miles north), Wantage (15 miles west) and Henley-on-Thames (8 miles east).
Landmarks near Ipsden
We visit homes around Langtree School, King William IV Public House and Church of St Mary, among other places. The nearest railway station is Cholsey station, roughly 3.3 miles west of the centre. Further afield, we also cover the area around Wallingford Castle (3.2 miles north-west). The countryside around Ipsden includes Cholsey Marsh.
About our bath repair in Ipsden
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. We are often asked to fix rusty patches near the plughole and deep scratches in acrylic, across cast iron enamel, pressed steel enamel and whirlpool & spa baths.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Ipsden (OX10)
- County
- Oxfordshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Common problems we fix in Ipsden
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water sits around them, and any chip there soon rusts.
If you can see any of these, send us a picture:
- Chips under the taps
- Cracks in an acrylic bath
- Impact holes in acrylic
- A chipped rim or side
Questions to ask before you book
- Aftercare advice
- How changes to the job are handled
- Whether there are any call-out or travel charges
- How your room will be protected
Places near Ipsden
Also in Ipsden
What we cannot put right
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Leaking fittings, which need a plumber
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a few hours. Before leaving, we tell you when it can be used and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, usually by the next day, the bath is ready to use.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
Get a quote
Upload pictures of the damage and one of the entire item, and tell us you’re in Ipsden, and we will come back with a fixed quote.
Advice
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in one visit. Repairs from £95, with every job priced individually. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Ipsden customers choose us
- A year’s guarantee on all work
- Colour mixed on the day to match
- One visit for most repairs
- One price list for the whole UK
Take a look at our prices page or bath cost comparison.
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- Whether we combine several jobs
- How many areas need work
- What kind of damage it is
- The colour and finish to match
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed price
Two or three clear pictures are typically enough. It helps if you send:
- A picture taken from further back
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Get any new chip repaired before it rusts
- Do not leave razors or cans standing in the bath
- Put a towel in the bath if you are working above it
- Rinse the bath after use, especially in hard water areas
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Ipsden: your questions answered
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How long before I can use the bath?
Generally the day after. We’ll tell you the exact curing time when we finish.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
What happens after I send photos?
We review the pictures and send a fixed quote with dates.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a cracked acrylic bath repairable?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
About our accreditations · Every repair comes with a one-year guarantee.
