County Durham · England
Bath chip & crack repair in Ireshopeburn, County Durham
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Ireshopeburn. Free, fixed quotes from your photos.
- Repairs from £95
- A cracked acrylic bath
- A hole punched through by something heavy
Bath repair in Ireshopeburn without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. We work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and people most often call us about chips on the rim or sides and an old repair that has yellowed or come loose.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Ireshopeburn (DL13)
- Region
- County Durham
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow a few hours. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
Get a quote
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Towns and villages near Ireshopeburn
Other services in Ireshopeburn
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Do you need bath repair in Ireshopeburn?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal lets water in, and rust follows.
The most common problems we are called about are:
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
Before booking anyone
- Whether a trained technician does the job
- How your room will be protected
- When it can be used again
- How long the guarantee is and what it covers
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Check that an acrylic bath doesn’t move when you stand in it
- Rinse it down after each bath
- Avoid scourers, wire wool and gritty cream cleaners
There’s nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Ireshopeburn and nearby
Ireshopeburn is about 17 miles south-west of Consett, in County Durham. Customers in Ireshopeburn get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover 329 places in County Durham. Our jobs stretch from Ireshopeburn to Newcastle upon Tyne (about 28 miles away).
Our visits in DL13 work the same way as everywhere else we cover. From Front Street, Hotts Lane and Causeway Road or anywhere nearby, we can come to you. If you’re just outside Ireshopeburn, we cover West Blackdene (1 mile north), Wearhead (1 mile north-west), St John's Chapel (1 mile east), Daddry Shield (2 miles east) and Heatherycleugh (2 miles north-west). We also work in nearby towns such as Wolsingham (13 miles east), Stanhope (8 miles east), Castleside (15 miles north-east) and Middleton-in-Teesdale (10 miles south-east).
Near you in Ireshopeburn
Locally, our jobs take us to homes close to Rancho Del Rio pub, Church of St John the Baptist and Wearhead Primary School, among other places. Well-known places in the area include Weardale Museum (under half a mile east).
What we can’t put right
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the whole surface, which needs re-enamelling
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Ireshopeburn
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
Why us?
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
Read our prices page or resurfacing vs replacement cost guide.
Ireshopeburn: your questions answered
I tried a repair kit. Can you fix it?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Do you work in Ireshopeburn?
Yes, we do. We send a technician to Ireshopeburn for every job, with no extra charge for travel.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Can you repair a crack in an acrylic bath?
Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
About our accreditations · Every repair comes with a one-year guarantee.
