County Durham · England
Bath Re-enamelling for Ireshopeburn homes
Bath re-enamelling across Ireshopeburn and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- An outdated colour you’d like to change
How we handle bath re-enamelling in Ireshopeburn
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It normally takes one visit, and can be used again the day after. We work on basins & shower trays, cast iron baths and pressed steel baths, and people most often call us about an original cast iron bath that needs restoring and a coloured bath you want in white.
Big or small, it’s backed by a one-year guarantee.
- Location
- Ireshopeburn (DL13)
- County
- County Durham
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Nearby places to Ireshopeburn
More services for Ireshopeburn
Do you need bath re-enamelling in Ireshopeburn?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
These are the problems we’re asked about most:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
What to look for in a quote
- What protection goes down before work starts
- Who turns up on the day
- Whether there are any call-out or travel charges
- How long it needs to cure
Prices and what affects them
Resurfacing from £350. You will not pay by the hour. The price depends on:
- How much damage there is
- Whether old repairs or coatings need taking off
- The material
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- The material, if you know it
Most customers in Ireshopeburn get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Ireshopeburn and nearby
Ireshopeburn is about 17 miles south-west of Consett, in County Durham. Whether you’re in the middle of Ireshopeburn or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Ireshopeburn is one of 329 towns and villages in County Durham where we work. We work right across the region, from Ireshopeburn to Newcastle upon Tyne (about 28 miles away).
Here we cover the DL13 postcode area. You will find streets such as Front Street, Hotts Lane and Causeway Road. We also cover the places around Ireshopeburn: West Blackdene (1 mile north), Wearhead (1 mile north-west), St John's Chapel (1 mile east), Daddry Shield (2 miles east) and Heatherycleugh (2 miles north-west). Larger places within reach include Wolsingham (13 miles east), Stanhope (8 miles east), Castleside (15 miles north-east) and Middleton-in-Teesdale (10 miles south-east).
Local landmarks in Ireshopeburn
In Ireshopeburn, that means homes near Rancho Del Rio pub, Church of St John the Baptist and Wearhead Primary School. Nearby you will also find Weardale Museum (less than half a mile east).
Repair or replace in Ireshopeburn?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Prices start from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Why choose Surface Doctor in Ireshopeburn
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Normally one visit, start to finish
- Honest advice, even when it means no job
Read our prices page and resurfacing vs replacement cost guide.
FAQs for Ireshopeburn
Do you come to Ireshopeburn?
We do. We send a technician to Ireshopeburn for every job, and the price is the same as everywhere else.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
What information do you need?
Use the quote form or ring 0345 017 0787.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How the visit works
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes the best part of a day in most cases. We leave the room clean.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
Ask for a price
Email us pictures of the damage and one of the entire item, with your DL13 postcode, and we will come back with a fixed quote.
Related advice
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
