South Gloucestershire · England
Bath chip & crack repair in Iron Acton, South Gloucestershire
Fixed-price bath repair in Iron Acton and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Holes from dropped items
Bath repair in Iron Acton, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair whirlpool & spa baths, roll-top & freestanding and acrylic, and common reasons people contact us are deep scratches in acrylic and chips on the rim or sides.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Iron Acton (BS37)
- Region
- South Gloucestershire
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Iron Acton
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Iron Acton questions
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
What areas do you cover?
All of South Gloucestershire, and the rest of the UK. There is no extra charge for travel.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
How much does bath repair cost in Iron Acton?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Aftercare tips
Looking after the surface is easy:
- Don’t leave a fresh chip for long
- Don’t leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Check that an acrylic bath doesn’t move when you stand in it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Nearby places to Iron Acton
Other services in Iron Acton
Landlord and trade work in Iron Acton
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Iron Acton, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
When to call us in Iron Acton
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
If you can see any of these, send us a picture:
- Deep scratches in acrylic
- A chipped rim or side
- Chips caused by builders
- Rusty patches near the plughole
Comparing quotes
- What preparation is included
- How changes to the job are handled
- Whether a trained technician does the job
- How soon you can use it again
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours. We clean up when we are done and tell you when it’s ready to use.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Iron Acton
- A year’s guarantee on all work
- No need to remove anything
- We will tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or bath cost comparison.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Iron Acton and nearby
Iron Acton is about 2 miles west of Yate, in South Gloucestershire. Whether you are in the middle of Iron Acton or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 110 towns and villages in South Gloucestershire. Our nearest city page is Birmingham, about 68 miles away.
All of BS37 is covered, from the main roads to the quietest streets. Jobs here include addresses on High Street, Station Road and Holly Hill and the roads around them. We also cover the places around Iron Acton: Mayshill (1 mile south), Nibley (1 mile south-east), Engine Common (1 mile east), Frampton Cotterell (1 mile south-west) and Coalpit Heath (2 miles south). We also work in nearby towns such as Kingswood (7 miles south), Mangotsfield (4 miles south), Fishponds (6 miles south-west), Bradley Stoke (4 miles west), Thornbury (5 miles north-west) and Patchway (5 miles west).
Near you in Iron Acton
Around Iron Acton, we work in homes near Church of St James the Less, White Hart Inn and Brimsham Green School and the streets around them. The closest station to Iron Acton is Yate station, about 1.3 miles south-east. Further afield, we also cover the area around Frenchay Hospital (4.5 miles south-west) and Dodington Carriage Museum (3.2 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
