Buckinghamshire · England

Bath chip & crack repair in Iver Heath, Buckinghamshire

Bath repair across Iver Heath and nearby, done in a single visit in most cases.

  • Repairs from £95
  • Cracks in an acrylic bath
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Iver Heath

Bath repair in Iver Heath, done in place

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We are often asked to fix snagging damage from a refit and a failed DIY repair that’s discoloured or lifting, across cast iron enamel, pressed steel enamel and acrylic.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.

Before and after: a chipped, rust-stained bath around the plughole
Where
Iver Heath (SL0)
Area hub
Buckinghamshire
Warranty
One year on every repair
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What happens on the day

We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the work takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Open a window if you can
  • Let the surface dry out before the visit

Getting a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a fixed quote

Read more

What affects the price in Iver Heath

Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:

  • How easy the damage is to reach
  • The size and number of damaged areas
  • Unusual colours or finishes
  • How many items we do on one visit

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what we need:

  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare
  • A picture taken from further back
  • Where you are, by postcode

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Why repair rather than replace?

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.

What you get with us

  • A year’s guarantee on all work
  • One visit for most repairs
  • We’ll tell you if it’s not worth repairing
  • Colour-matched on site

Read our prices page and resurfacing vs replacement cost guide.

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Make sure an acrylic bath is firm underfoot
  • Avoid scourers, wire wool and gritty cream cleaners
  • Fix dripping taps early to stop staining and limescale
  • Get any new chip repaired before it rusts

A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

Where we work around Iver Heath

Iver Heath is about 3 miles west of Hillingdon, in Buckinghamshire. Whether you are in the middle of Iver Heath or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Iver Heath is one of 263 places in Buckinghamshire we cover. Our jobs stretch from Iver Heath to London (19 miles away).

Here we cover the SL0 postcode area. From Church Road, Alder Road and Rowan Gardens or a nearby road, a technician can come to you. Neighbouring places we cover include Iver (1 mile south-east), Shreding Green (1 mile south), Rush Green (2 miles north), George Green (2 miles south-west) and Wexham Street (2 miles west). Within a short drive, we also cover High Wycombe (12 miles north-west), Chesham (13 miles north), Marlow (11 miles west), Amersham (10 miles north), Beaconsfield (7 miles north-west) and Chalfont St Peter (5 miles north).

What’s near Iver Heath

Typical jobs here are in homes near Church of St Margaret, The Black Horse pub and West Middlesex College and the streets around them. Also close by are Uxbridge High School (2.1 miles east) and Iver Heath Infant School and Nursery (less than half a mile south-east). For rail, the closest station is Iver station, roughly 2.1 miles south. Well-known places in the area include Wexham Park Hospital (2.3 miles west) and British Airways Heritage Collection (1.5 miles east). Not far away are Horse Shoe Bay and Kingcup Meadows and Oldhouse Wood.

Map of Iver Heath © OpenStreetMap contributors

What we’re called out for in Iver Heath

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.

Keep an eye out for these signs:

  • A chipped rim or side
  • Chips under the taps
  • Deep scratches in acrylic
  • Rust by the waste and overflow

Before booking anyone

  • Whether there are any call-out or travel charges
  • What aftercare is recommended
  • Whether cleaning and preparation are in the price
  • How soon you can use it again

Choosing a repair company

Iver Heath: your questions answered

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

It’s been repaired before. Can you still fix it?

Normally, yes. We remove the old repair before doing a new one, so let us know about it.

Which areas do you work in?

Everywhere in the UK, Iver Heath included. There is no extra charge for travel.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your photos and you will get one combined price.

I tried a repair kit. Can you fix it?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote with dates.

When can I have a bath again?

Normally by the following day, depending on the repair.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Honest limits

Before booking, it’s worth knowing the limits too:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Water coming from the waste or taps rather than the bath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths

Landlords, agents and businesses in Iver Heath

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.