Dumfries and Galloway · Scotland
Bath Repair in Kelhead
Local bath repair for Kelhead: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- We leave the room as we found it
- Same prices wherever you are
- Work done at your home or business
- Nothing taken out or refitted
Read our pricing or resurfacing vs replacement cost guide.
Bath repair at your home in Kelhead
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. Whether it’s holes from dropped items and deep scratches in acrylic, we can typically put it right, on whirlpool & spa baths, roll-top & freestanding and cast iron enamel alike.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Where
- Kelhead (DG12)
- Area hub
- Dumfries and Galloway
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Kelhead and nearby
Kelhead is about 11 miles east of Dumfries, in Dumfries and Galloway. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Kelhead is one of 138 towns and villages in Dumfries and Galloway where we work. Our jobs stretch from Kelhead to Edinburgh (about 65 miles away).
We work across the DG12 postcode area. If you’re just outside Kelhead, we cover Cummertrees (2 miles south), Powfoot (2 miles south), Brydekirk (3 miles east), Howes (3 miles south-east) and Newbie (3 miles south-east). Larger places within reach include Dumfries (11 miles west), Annan (4 miles south-east), Lockerbie (8 miles north), Heathhall (11 miles north-west), Newbridge Drive (13 miles north-west) and Gretna (11 miles east).
What’s near Kelhead
For rail, the closest station is Annan station, roughly 3.6 miles south-east of the centre. Nearby you will also find Ruthwell Museum (3 miles south-west) and Annan Hospital (4 miles south-east).
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
How it works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the following day.
Getting ready for the visit
- Have a window or extractor fan available
- Ensure the area is dry
- Point us to the nearest place to park
Getting a price
For a price in Kelhead, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Store metal items away from the bath
- Have new chips seen to early
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
For anyone letting property in or around Kelhead, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
FAQs for Kelhead
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Kelhead.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens after I send pictures?
We come back with a fixed quote, plus dates. You’re under no obligation.
Will the repair show?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Signs you need bath repair in Kelhead
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal lets water in, and rust follows.
Look out for any of the following:
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
- Deep scratches in acrylic
- Chips along the edge of the bath
Comparing quotes
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Towns and villages near Kelhead
What else we do in Kelhead
About our accreditations · Every repair comes with a one-year guarantee.
