South Gloucestershire · England

Bath chip & crack repair in Kendleshire, South Gloucestershire

Bath repair for Kendleshire, without a refit. Get a fixed quote from your pictures, then book a visit.

  • Repairs from £95
  • Holes from dropped items
  • A failed DIY repair that is discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Kendleshire

How we handle bath repair in Kendleshire

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. We are frequently asked to fix rust spots around the plughole and a cracked acrylic bath, on acrylic, cast iron enamel and roll-top & freestanding.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Kendleshire (BS36)
Area hub
South Gloucestershire
Cover
12 months on all our work
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

How the visit works

We turn up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access
  • Let the surface dry out before the visit

How to get a price

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a fixed price

Read more

Repair or replace: which is better?

A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why choose Surface Doctor in Kendleshire

  • CHAS, Constructionline and SafeContractor accredited
  • Work done at your home or business
  • One visit for most repairs
  • No need to remove anything

Take a look at our pricing or bath cost comparison.

Honest limits

In fairness, some problems need a different fix:

  • Leaking fittings, which need a plumber
  • A bath worn all over, where resurfacing makes more sense
  • Acrylic cracks with no access behind them

Send us pictures and we will tell you honestly before you book.

Materials we work on in Kendleshire

  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Kendleshire: your questions answered

When can I have a bath again?

Normally by the following day, though it depends on what we’ve done.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Do you charge for travel?

We don’t add a call-out fee. The fixed price covers the visit and the work.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

What happens after I send pictures?

You will get a fixed quote back, plus dates. There’s no obligation to book.

How do I book?

Just photos, your postcode and a contact number. On the day, access to the room.

Prices and what affects them

Repairs from £95. You’ll know the full cost before booking. We take into account:

  • What kind of damage it is
  • Any earlier repairs that need removing first
  • How many areas need work
  • What the surface is made of

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Quotes from your pictures

A couple of clear pictures is all it takes. It helps if you send:

  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before
  • One picture of the entire bath
  • Any details about the material

Upload pictures of the damage and one of the whole item, and tell us you’re in Kendleshire, and we’ll reply with a fixed price.

When to call us in Kendleshire

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.

Signs it’s time to call us include:

  • Cracks in an acrylic bath
  • Chips under the taps
  • A kit repair that didn’t last
  • Rust by the waste and overflow

Questions to ask before you book

  • Whether cleaning and preparation are in the price
  • Whether a trained technician does the job
  • What happens if the damage is worse than the photos show
  • How the room is protected while they work

How to compare quotes

Our work in Kendleshire

Kendleshire (also: Kendleshire Crossroads) is about 2 miles north of Mangotsfield, in South Gloucestershire. Our technicians come to homes and businesses in Kendleshire, so there is no workshop to go to. We cover all 110 towns and villages across South Gloucestershire. You can also see our page for Birmingham, about 71 miles away.

Our visits in BS36 work the same way as everywhere else we cover. From Badminton Road, Huckford Lane and Ruffet Road or anywhere nearby, we can come to you. Nearby, we also work in Henfield (1 mile east), Coalpit Heath (1 mile north-east), Watley's End (1 mile north-west), Frampton Cotterell (1 mile north) and Ram Hill (1 mile east). We also work in nearby towns such as Kingswood (5 miles south), Yate (3 miles north-east), Fishponds (3 miles south-west), Bradley Stoke (3 miles west), Thornbury (7 miles north) and Patchway (4 miles west).

Local landmarks in Kendleshire

Locally, our jobs take us to homes close to The Manor Coalpit Heath Church of England Primary School, Winterbourne Academy and Church of St Saviour, among other places. Kendleshire’s nearest station is Bristol Parkway station, roughly 2.6 miles west. Other landmarks nearby include Frenchay Village Museum (2.4 miles south-west) and Frenchay Hospital (2.2 miles south-west). The countryside around Kendleshire includes Lodge Hill.

Map of Kendleshire © OpenStreetMap contributors

How to look after the repair

Most damage we see is avoidable. A few tips:

  • A dripping tap stains enamel, so fix it early
  • Get any new chip repaired before it rusts
  • Give the bath a quick rinse after use
  • Avoid scourers, wire wool and gritty cream cleaners

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.