South Gloucestershire · England

Bath Repair for Ram Hill homes

Bath repair in Ram Hill without the cost of replacing. Get a fixed price from your photos, then book a visit.

  • Repairs from £95
  • Chips under the taps
  • A chipped rim or side
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Ram Hill

How we handle bath repair in Ram Hill

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. Typical jobs include snagging damage from a refit and rust by the waste and overflow, on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Ram Hill (BS36)
Region
South Gloucestershire
Guarantee
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Ram Hill: your questions answered

Can you redo an old repair?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

Do you cover Ram Hill?

We do. We send a technician to Ram Hill for every job, and the price is the same as everywhere else.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

Is there a guarantee?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.

Do you cover the entire of South Gloucestershire?

The whole UK, including all of South Gloucestershire. Just include your postcode and we’ll offer you dates.

Something went through my bath. Can it be fixed?

Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

Prices and what affects them

Repairs from £95. A fixed quote means you know the cost before booking. We take into account:

  • How hard the colour is to match
  • How many areas need work
  • How many items we do on one visit
  • The type of damage

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.

Send photos for a quote

Most quotes are done from photos alone. To help us price it:

  • One picture of the entire bath
  • Details of any past repairs
  • Your postcode, so we can check dates
  • Something in shot to show the size

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Should you replace it?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Ram Hill

  • One-year guarantee on every repair
  • One price list for the entire UK
  • A fixed quote before booking
  • We leave the room as we found it

Take a look at our prices page or guide to resurfacing and replacement costs.

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

Signs you need bath repair in Ram Hill

Rust usually starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

These are the problems we’re asked about most:

  • Impact holes in acrylic
  • Chips caused by builders
  • Hairline or through cracks in acrylic
  • A kit repair that didn’t last

Comparing quotes

  • How soon you can use it again
  • The length of the guarantee and what it covers
  • How the room is protected while they work
  • What happens if the damage is worse than the pictures show

How to compare quotes

Aftercare tips

Looking after the surface is easy, and it makes a real difference:

  • If an acrylic bath flexes, have its feet adjusted
  • Do not scrub with anything abrasive
  • Get a dripping tap fixed promptly
  • Rinse the bath after use, especially in hard water areas

Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Ram Hill and nearby

Ram Hill is about 2 miles north-east of Mangotsfield, in South Gloucestershire. Clients in Ram Hill get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Ram Hill is one of 110 places in South Gloucestershire we cover. We work right across the region, from Ram Hill to Birmingham (70 miles away).

Every address in BS36 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Broad Lane and Ram Hill. Other places close to Ram Hill include Henfield (1 mile south), Coalpit Heath (1 mile north-west), Kendleshire (1 mile west), Westerleigh (1 mile east) and Frampton Cotterell (1 mile north-west). Further out, we also cover Kingswood (5 miles south), Yate (3 miles north-east), Fishponds (4 miles south-west), Bradley Stoke (4 miles west), Thornbury (7 miles north) and Patchway (5 miles west).

Around Ram Hill

Around Ram Hill, we work in homes near Winterbourne Academy, Church of St Saviour and The Manor Coalpit Heath Church of England Primary School and the streets around them. The closest station to Ram Hill is Yate station, roughly 1.9 miles north-east. Other landmarks nearby include Frenchay Hospital (3.2 miles south-west) and Dodington Carriage Museum (2.8 miles east). Not far away are Lodge Hill.

Map of Ram Hill © OpenStreetMap contributors

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

When we’d advise against a repair

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Rust that has eaten right through a steel bath
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath that moves underfoot, until its support is fixed

Send us photos and we will tell you honestly before booking.

Materials we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Ensure the room can be ventilated
  • Keep a parking space free if you can

Get a quote

Upload a photo of the damage and one of the whole item, and tell us you are in Ram Hill, and we will come back with a fixed quote.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.