Glasgow · Scotland
Bath chip & crack repair in Kennishead, Glasgow
We travel to Kennishead for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- Hairline or through cracks in acrylic
How we handle bath repair in Kennishead
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Common call-outs are for hairline or through cracks in acrylic and scuffs and scratches in the surface, on acrylic, whirlpool & spa baths and roll-top & freestanding.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Kennishead (G46, G43, G53)
- Region
- Glasgow
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Places near Kennishead
What else we do in Kennishead
Aftercare tips
To keep it looking its best for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
- Do not leave razors or cans standing in the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Do you need bath repair in Kennishead?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we’re called about are:
- Cracks in an acrylic bath
- Chips along the edge of the bath
- Impact holes in acrylic
- An old repair that has yellowed or come loose
What to look for in a quote
- The length of the guarantee and what it covers
- Whether the price covers travel
- How your room will be protected
- Aftercare advice
Repair or replace: which is better?
Swapping a damaged bath for a new one generally means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Kennishead
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- A year’s guarantee on all work
- Straight answers about what a repair can do
Take a look at our pricing and guide to resurfacing and replacement costs.
Our work in Kennishead
Kennishead is about 2 miles north-west of Giffnock, in Glasgow. Jobs in Kennishead are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We work in all 183 towns and villages in Glasgow.
Postcode districts we cover here: G46, G43 and G53. From Brent Road, Main Street and Kilmuir Road or anywhere nearby, a technician can come to you. Nearby, we also work in Carnwadric (1 mile south), Arden (1 mile south-west), Eastwood (1 mile east), Cowglen (1 mile north-west) and Mansewood (1 mile east). We also work in nearby towns such as Glasgow (3 miles north-east), Hillhead (4 miles north), Dowanhill (5 miles north), Woodlands (4 miles north-east), Woodside (5 miles north-east) and North Kelvinside (5 miles north).
Local landmarks in Kennishead
In Kennishead, that means homes near Hillpark Secondary School, Glasgow and Rouken Glen and the streets around them. There’s a railway station in Kennishead itself: Kennishead station. Other landmarks nearby include Silverburn Shopping Centre (0.9 miles north-west) and The Open Museum (1.6 miles west). Green spaces nearby include Cathkin Braes.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Questions from Kennishead
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How much does bath repair cost in Kennishead?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you work in Kennishead?
We do. We send a technician to Kennishead for every job, and the price is the same as everywhere else.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for two to three hours for most chips. Before leaving, we tell you how long to leave it and how to look after it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
How to get a price
Send us pictures of the damage and one of the whole item, and tell us you’re in Kennishead, and we’ll come back with a fixed quote.
Advice
Prices and what affects them
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- The material
- How hard the colour is to match
- What kind of damage it is
- Previous DIY repairs that have to come out
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Getting a price from photos
Most quotes are done from photos alone. To make it quick:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- What it’s made of, if you know
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
When we would advise against a repair
It helps to know what we can’t do:
- Rust that has eaten right through a steel bath
- Wear across the entire surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
Send us pictures and we will tell you honestly.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
