Greater London · England

Bath chip & crack repair in Kenton, Greater London

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Kenton and across Greater London. Free, fixed quotes from your pictures.

  • Repairs from £95
  • A cracked acrylic bath
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Kenton

Bath repair at your home in Kenton

We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. We regularly repair pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are holes from dropped items and cracks in an acrylic bath.

A one-year guarantee comes as standard.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Kenton (HA3, HA7, HA1)
Area hub
Greater London
Warranty
One year on every repair
Price
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

Kenton questions

Will the repair show?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Do you cover Kenton?

Yes, we do. Repair technicians travel to Kenton from across the region, with no extra charge for travel.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Just add the extra items to your pictures and we will quote them together.

How do I get a price for bath repair in Kenton?

Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

How it works

Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and we leave the room as we found it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the following day.

Preparing for the visit

  • Keep a parking space free if you can
  • Tell us about parking, stairs or access
  • Have a window or extractor fan available

Ask for a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.

Get a fixed price

Related advice

Different materials, different repairs

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Repair or replace: which is better?

Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why us?

  • Colours mixed by hand to suit your surface
  • A fixed quote before you book
  • One visit for most repairs
  • One price list for the entire UK

See our pricing and guide to resurfacing and replacement costs.

Do you need bath repair in Kenton?

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.

Get in touch if you’ve noticed:

  • Deep scratches in acrylic
  • A chipped rim or side
  • Cracks in an acrylic bath
  • Chips caused by builders

What your quote should include

  • Who turns up on the day
  • Aftercare advice
  • Whether the colour is mixed to match
  • When it can be used again

How to compare quotes

When a repair is not the answer

A repair is not always the answer, and we’ll tell you before we start. We cannot fix:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Rust that has eaten right through a steel bath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we work on in Kenton

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic

How to care for the repair

Simple care helps the repair last. Our advice:

  • If an acrylic bath flexes, have its feet adjusted
  • Put a towel in the bath if you’re working above it
  • Clean with warm water and a mild detergent
  • Give the bath a quick rinse after use

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.

Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.

Where we work around Kenton

Kenton is about 2 miles south of Stanmore, in Greater London. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 764 places across Greater London, from the larger towns to small villages. Our nearest city page is London, about 11 miles away.

We work across the HA3, HA7 and HA1 postcode area. You’ll find streets such as Retreat Close, Kenton Road and Woodgrange Avenue, and we cover them all. Being close to the A4006, Kenton is simple for us to get to. We also travel to South Kenton (1 mile south), Northwick Park (1 mile south-west), Greenhill (1 mile west), Wealdstone (1 mile north-west) and Harrow on the Hill (2 miles south-west). We also work in nearby towns such as London (11 miles south-east), City of Westminster (8 miles south-east), Marylebone (8 miles south-east), Kensington (7 miles south-east), St Pancras (9 miles south-east) and Shoreditch (11 miles south-east).

Around Kenton

Around Kenton, we work in homes near Uxendon Manor Primary School, Preston Park and The New Moon pub. Nearby too are St Gregory's Catholic Science College (less than half a mile south-east) and Church of St Mary (less than half a mile west). The closest station to Kenton is Kenton station, about 0.5 miles south-west. Further afield, we also cover the area around St. Anns (1.3 miles west) and Hilfield Castle (4.9 miles north). Green spaces nearby include Masons Field and Northala Fields.

Map of Kenton © OpenStreetMap contributors

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What affects the price in Kenton

Repairs from £95. We charge the same across the UK, including Kenton. The price reflects:

  • Previous DIY repairs that have to come out
  • How many areas need work
  • The material
  • The colour and finish to match

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Send photos for a quote

It only takes a minute to photograph the damage. Please include:

  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.