Kent · England

Bath chip & crack repair in Kettle Corner, Kent

Our technicians come to Kettle Corner for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Impact holes in acrylic
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Kettle Corner

Signs you need bath repair in Kettle Corner

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.

You may need us if you’ve spotted any of these:

  • Rust spots around the plughole
  • Impact holes in acrylic
  • Scuffs and scratches in the surface
  • Damage done while the bathroom was being fitted

Questions to ask before you book

  • Whether there are any call-out or travel charges
  • What the guarantee covers, and for how long
  • Whether cleaning and preparation are in the price
  • How the room is protected while they work

Choosing a repair company

About our bath repair in Kettle Corner

A typical bath repair is a few hours’ work, and the bath is back in use the day after. There is no need to book a plumber or tiler, because the bath doesn’t move. We work on pressed steel enamel, whirlpool & spa baths and acrylic, and the jobs we see most are chips under the taps and holes from dropped items.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Where
Kettle Corner (ME15)
Region
Kent
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Repairs by material

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

Repair or replace in Kettle Corner?

Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • We will tell you if it’s not worth repairing
  • We come to you, anywhere in the UK
  • Colours mixed by hand to suit your surface

Take a look at our full price list or bath cost comparison.

What a repair can’t fix

A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:

  • Acrylic cracks with no access behind them
  • Wear across the entire surface, which needs re-enamelling
  • Metal that has corroded all the way through

Send us photos and we’ll tell you honestly before booking.

What we work on

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding

Kettle Corner questions

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Do you cover the entire of Kent?

Everywhere in the UK, Kettle Corner included. There’s no extra charge for travel.

Is there a call-out fee?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Is the work guaranteed?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.

Can you fix rust around the plughole?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

Can I add another job to the visit?

Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.

Can a cracked acrylic bath be fixed?

Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.

What affects the price in Kettle Corner

Repairs from £95. You’ll know the full cost before you book. We look at:

  • How many items we do on one visit
  • Where the damage is and how we get to it
  • How many areas need work
  • The material and finish

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your pictures

Most quotes are done from photos alone. To make it quick:

  • A wider photo showing the whole bath
  • A close-up of the damage, in focus
  • Any details about the material
  • Your postcode, so we can check dates

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Covering Kettle Corner

Kettle Corner is about 3 miles west of Maidstone, in Kent. Clients in Kettle Corner get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Our repair technicians cover all 922 towns and villages in Kent, from the larger towns to small villages. Our jobs stretch from Kettle Corner to London (30 miles away).

Our technicians cover all of the ME15 postcode area and the streets around it. Streets in the area include St Helens Lane and Lower Road, and we cover them all. Other places close to Kettle Corner include Hoppers Corner (1 mile south-west), Barming Heath (1 mile north-west), Farleigh Green (1 mile south-west), East Farleigh (1 mile east) and West Farleigh (1 mile south-west). Larger places within reach include Maidstone (3 miles east), Sittingbourne (13 miles north-east), Sevenoaks (12 miles west), Royal Tunbridge Wells (12 miles south-west), Gravesend (13 miles north) and Tonbridge (9 miles south-west).

Near you in Kettle Corner

Locally, our jobs take us to homes close to Quarry Wood, Church of St Margaret and Barming Primary School. Other local landmarks include Oakwood Park Grammar School (1.6 miles north-east) and The Bull Inn (0.5 miles north). For rail, the closest station is East Farleigh station, roughly 0.7 miles east of the centre. Other landmarks nearby include Fremlin Walk (2.5 miles north-east) and Oakwood Hospital (1.1 miles north-east). Open spaces near Kettle Corner include Boxley Hills.

Map of Kettle Corner © OpenStreetMap contributors

Work for landlords and builders

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

What we do, step by step

On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a few hours, including clearing up.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can normally use the bath the following day.

Before we arrive

  • Let the surface dry out before the visit
  • Mention any earlier repairs or resurfacing
  • Clear the area around the damage

Getting a price

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.

Get a fixed price

Advice

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Do not scrub with anything abrasive
  • Rinse the bath after use, especially in hard water areas
  • Get a dripping tap fixed promptly
  • Make sure an acrylic bath is firm underfoot

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.

Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.