Kent · England
Bath Re-enamelling for Kettle Corner homes
Bath re-enamelling in and around Kettle Corner: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that don’t clean off
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Bath re-enamelling at your home in Kettle Corner
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. If you’re dealing with an old resurfacing that’s failing and wear marks under the taps, we can help.
We stand behind the work with a one-year guarantee.
- Area
- Kettle Corner (ME15)
- Region
- Kent
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Kettle Corner
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote and the next dates we have.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do you come to Kettle Corner?
We do. Repair technicians travel to Kettle Corner from across the region, and the price is the same as everywhere else.
What areas do you cover?
Across the UK. Prices do not change with location.
How much does bath re-enamelling cost in Kettle Corner?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your ME15 postcode.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why book with us
- Dust sheets down, tidy finish
- Same prices wherever you are
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
Read our prices page and bath cost comparison.
What we are called out for in Kettle Corner
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
These are the problems we’re asked about most:
- Staining under the taps and around the waste
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
What your quote should include
- How your room will be protected
- How soon you can use it again
- If travel is included in the price
- What prep work is covered
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Honest limits
Some jobs aren’t right for a repair, for example:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Places near Kettle Corner
More services for Kettle Corner
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
Ask for a price
Send us pictures of the damage and a wider shot of the entire item, with your ME15 postcode, and we will come back with a fixed quote.
Advice
Our work in Kettle Corner
Kettle Corner is about 3 miles west of Maidstone, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Kettle Corner is one of 922 places in Kent we cover. Our jobs stretch from Kettle Corner to London (about 30 miles away).
Every address in ME15 is within our area, from the main roads to the quietest streets. Jobs here include addresses on St Helens Lane and Lower Road and the roads around them. Nearby, we also work in Hoppers Corner (1 mile south-west), Barming Heath (1 mile north-west), Farleigh Green (1 mile south-west), East Farleigh (1 mile east) and West Farleigh (1 mile south-west). Within a short drive, we also cover Maidstone (3 miles east), Sittingbourne (13 miles north-east), Sevenoaks (12 miles west), Royal Tunbridge Wells (12 miles south-west), Gravesend (13 miles north) and Tonbridge (9 miles south-west).
Near you in Kettle Corner
Around Kettle Corner, we work in homes near Quarry Wood, Church of St Margaret and Barming Primary School and the streets around them. Nearby too are Oakwood Park Grammar School (1.6 miles north-east) and The Bull Inn (0.5 miles north). Kettle Corner’s nearest station is East Farleigh station, about 0.7 miles east. Further afield, we also cover the area around Fremlin Walk (2.5 miles north-east) and Oakwood Hospital (1.1 miles north-east). The countryside around Kettle Corner includes Boxley Hills.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
About our accreditations · Every repair comes with a one-year guarantee.
