North Yorkshire · England

Bath Repair for Kettlewell homes

We travel to Kettlewell for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Kettlewell

Repair or replace in Kettlewell?

Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Kettlewell. What changes the price is the job itself: the material, the amount of damage and how many items.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • One visit for most repairs
  • Work done at your home or business
  • Honest advice, even when it means no job

Read our pricing and resurfacing vs replacement cost guide.

Bath repair in Kettlewell without replacing anything

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We regularly repair acrylic, whirlpool & spa baths and cast iron enamel, and the jobs we see most are chips under the taps and chips on the rim or sides.

All our work comes with our one-year guarantee, wherever you are in North Yorkshire.

Location
Kettlewell (BD23)
Region
North Yorkshire
Warranty
One year on every repair
Quotes
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

What happens on the day

Here’s how a visit normally runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow two to three hours for most chips. Before we go, we’ll explain how long to leave it and how to look after it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Make sure the area is dry
  • Clear toiletries, mats and anything else from around the area
  • Keep pets and children out of the room while we work

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.

Send pictures for a quote

Related advice

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Questions from Kettlewell

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Will the repair show?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference.

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Are there extra charges for Kettlewell?

There’s no separate call-out charge. Your fixed quote includes everything.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you repair several things at once?

Of course, and it normally saves money. Just add the extra items to your pictures and we will quote them together.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

How we price bath repair

Repairs from £95. There are no hourly rates or hidden extras. The price depends on:

  • How much damage there is
  • The colour and finish to match
  • How many items we do on one visit
  • Whether old repairs or coatings need taking off

There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

We price nearly every job from photos. This is what to send:

  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area
  • The material, if you know it
  • Where you are, by postcode

Upload a picture of the damage and a wider shot of the whole item, and tell us you’re in Kettlewell, and we’ll reply with a fixed quote.

Aftercare tips

So the finish stays in good condition for years:

  • Put a towel in the bath if you are working above it
  • Rinse it down after each bath
  • Get any new chip repaired before it rusts
  • A dripping tap stains enamel, so fix it early

Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.

Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.

What we can’t put right

A few problems are outside what a surface repair can do:

  • Flexing caused by a failed cradle or loose feet
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Water coming from the waste or taps rather than the bath

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths

Landlords, agents and businesses in Kettlewell

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Landlords, letting agents and housing providers in Kettlewell use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Covering Kettlewell

Kettlewell is about 13 miles north of Skipton, in North Yorkshire. Whether you’re in the middle of Kettlewell or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 626 towns and villages across North Yorkshire. Our jobs stretch from Kettlewell to Leeds (31 miles away).

We cover every part of BD23 and the streets around it. You will find streets such as The Green, Middle Lane and Far Lane. We also travel to Hawkswick (1 mile south-west), Starbotton (2 miles north-west), Arncliffe (2 miles west), Kilnsey (3 miles south) and Hubberholme (5 miles north-west). Larger places within reach include Skipton (13 miles south), Settle (11 miles south-west), Pateley Bridge (12 miles east), Grassington (6 miles south), Embsay (12 miles south) and Leyburn (14 miles north-east).

What’s near Kettlewell

Typical jobs here are in homes near The King's Head pub, Church of St Mary and Kettlewell Primary School, among other places.

Map of Kettlewell © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.