North Yorkshire · England
Bath chip & crack repair in Kilnsey, North Yorkshire
Bath repair for Kilnsey, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips on the rim or sides
Bath repair at your home in Kilnsey
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with a chipped rim or side and an old repair that has yellowed or come loose, we can help, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel alike.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Kilnsey (BD23)
- Region
- North Yorkshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Should you replace it?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Kilnsey
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- No extra charge for your area
- Most jobs done in one visit
Take a look at our prices page or resurfacing vs replacement cost guide.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Our work in Kilnsey
Kilnsey is about 10 miles north of Skipton, in North Yorkshire. Across the BD23 area, we carry out the work at your property. Kilnsey is one of 626 places in North Yorkshire where we work. Our jobs stretch from Kilnsey to Leeds (29 miles away).
Jobs in BD23 are booked in the same way as anywhere else. We also travel to Long Ashes (2 miles south), Hawkswick (2 miles north-west), Skirethorns (3 miles south), Threshfield (3 miles south-east) and Kettlewell (3 miles north). Within a short drive, we also cover Skipton (10 miles south), Settle (10 miles west), Pateley Bridge (12 miles east), Embsay (9 miles south), Gargrave (9 miles south) and Giggleswick (10 miles west).
Landmarks near Kilnsey
Locally, our jobs take us to homes close to St Mary's Church and Tennant Arms, among other places. Further afield, we also cover the area around Grassington Folk Museum (3 miles south-east).
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
FAQs for Kilnsey
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
Do you come to Kilnsey?
Yes, we do. Repair technicians travel to Kilnsey from across the region, with no extra charge for travel.
Which areas do you work in?
We work UK-wide, so Kilnsey is covered. Our prices are the same everywhere.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can you repair a hole in a bath?
Normally. Send us a photo of the hole and one from under the bath if you can.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Kilnsey
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
What we do, step by step
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
Ask for a price
To get a price, send a couple of pictures through our quote form or call us. We’ll say straight away whether it can be repaired.
Advice
Aftercare tips
After the repair has cured, a few habits help it last:
- Avoid scourers, wire wool and gritty cream cleaners
- Give the bath a quick rinse after use
- Make sure an acrylic bath is firm underfoot
- Do not leave a fresh chip for long
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
What else we do in Kilnsey
When to call us in Kilnsey
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
Send us a picture if you notice any of these:
- Chips under the taps
- Chips along the edge of the bath
- A cracked acrylic bath
- An old repair that has yellowed or come loose
What your quote should include
- How long the guarantee is and what it covers
- What happens if they find more damage
- Whether they match the colour on site
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
