Nottinghamshire · England

Bath chip & crack repair in Keyworth, Nottinghamshire

Problem with your bath in Keyworth? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • A failed DIY repair that’s discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Keyworth

Bath repair in Keyworth without replacing anything

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s impact holes in acrylic and cracks in an acrylic bath, we can usually put it right, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Location
Keyworth (NG12)
Region
Nottinghamshire
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

What bath repair costs

Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:

  • The material
  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • How hard the colour is to match

We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your pictures

The better the pictures, the more accurate the price. Here’s what helps:

  • The material, if you know it
  • One picture of the entire bath
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Landlord and trade work in Keyworth

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

When a repair is not the answer

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Acrylic cracks with no access behind them
  • Wear across the whole surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel

Why repair rather than replace?

People often assume a cracked or chipped bath has to come out. Generally it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.

Why us?

  • No extra charge for your area
  • Colour mixed on the day to match
  • CHAS and Constructionline accredited
  • Repair technicians who travel to you, UK-wide

Take a look at our prices page and resurfacing vs replacement cost guide.

How it works

Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a few hours, depending on the damage for most jobs. The room is left tidy.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, normally the next day.

Before we arrive

  • Ensure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area
  • Tell us about parking, stairs or access

Ask for a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Read more

Common questions in Keyworth

Can pets and children be at home?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

Can you repair a crack in an acrylic bath?

Usually, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.

Can you redo an old repair?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Is a bath repair permanent?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.

What happens after I send pictures?

You’ll get a fixed quote back, plus dates. There is no obligation to book.

When can I have a bath again?

Typically the day after. We will tell you the exact curing time when we finish.

Keyworth and the surrounding area

Keyworth is about 4 miles south-east of West Bridgford, in Nottinghamshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Keyworth is one of 329 towns and villages in Nottinghamshire where we work. Our nearest city page is Birmingham, about 44 miles away.

Here we cover the NG12 postcode area. We regularly work on streets such as The Square, Main Street and Station Road and the roads around them. We also cover the places around Keyworth: Plumtree (1 mile north), Stanton-on-the-Wolds (1 mile east), Normanton-on-the-Wolds (1 mile north), Widmerpool (2 miles south-east) and Hickling Pastures (4 miles south-east). Further out, we also cover Beeston (7 miles north-west), Carlton (7 miles north), Hucknall (12 miles north-west), West Bridgford (4 miles north-west), Netherfield (6 miles north) and Eastwood (13 miles north-west).

Near you in Keyworth

Locally, our jobs take us to homes close to The Keyworth Tavern, The South Wolds Academy & Sixth Form and Keyworth Primary and Nursery School. Well-known places in the area include Sneinton Asylum (5.8 miles north) and Ruddington Village Museum (2.9 miles north-west). Green spaces nearby include Wilwell Farm Nature Reserve and Wilford Hill.

Map of Keyworth © OpenStreetMap contributors

What we are called out for in Keyworth

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.

Keep an eye out for any of the following:

  • Rust by the waste and overflow
  • An old repair that has yellowed or come loose
  • A chipped rim or side
  • Scratches you can feel with a fingernail

Comparing quotes

  • How long the guarantee is and what it covers
  • How to care for the finish
  • What happens if the damage is worse than the photos show
  • How the room is protected while they work

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.