Darlington · England
Bath chip & crack repair in Killerby, Darlington
We travel to Killerby for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- Snagging damage from a refit
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Bath repair in Killerby without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We are often asked to fix rust by the waste and overflow and a hole punched through by something heavy, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding.
All our work comes with our one-year guarantee.
- Area
- Killerby (DL2)
- County
- Darlington
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Killerby
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water collects there, so chips nearby rust quickly.
These are the problems we’re asked about most:
- Snagging damage from a refit
- Holes from dropped items
- A cracked acrylic bath
- Chips under the taps
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
- How soon you can use it again
- The length of the guarantee and what it covers
Your questions about bath repair in Killerby
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and we will quote them together.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
How long does the repair take to cure?
Usually the following day. We confirm the time before we leave.
Repair or replace in Killerby?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Fixed prices from your pictures
- No extra charge for your area
- Straight answers about what a repair can do
- Every repair guaranteed for a year
Read our full price list and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Landlord and trade work in Killerby
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
How to care for the repair
So the finish stays in good condition for years:
- Clean with warm water and a mild detergent
- Cover the bath during DIY or decorating
- Get a dripping tap fixed promptly
- If an acrylic bath flexes, have its feet adjusted
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Also in Killerby
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the next day, the bath is ready to use.
How to prepare
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Related advice
Killerby and the surrounding area
Killerby is about 5 miles south-west of Shildon, in Darlington. Customers in Killerby get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in 53 places in Darlington, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 29 miles away.
Our repair technicians cover all of the DL2 postcode area and the streets around it. Neighbouring places we cover include Langton (1 mile west), Ingleton (1 mile west), Gainford (2 miles south-west), Barforth (3 miles south-west) and Eppleby (4 miles south). Within a short drive, we also cover Darlington (7 miles south-east), Harrowgate Hill (7 miles east), West Park (5 miles south-east), Eastbourne (8 miles south-east), Cockerton (6 miles south-east) and Rise Carr (6 miles east).
Near you in Killerby
The closest station to Killerby is Shildon station, roughly 4.4 miles north-east. A little further out are West Park Hospital (5 miles south-east) and Walworth Castle (2.5 miles south-east).
When we would advise against a repair
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- A steel bath rusted through
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
