Aberdeen · Scotland
Bath chip & crack repair in Kingseat, Aberdeen
Problem with your bath in Kingseat? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- Cracks in an acrylic bath
Bath repair at your home in Kingseat
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Typical jobs include holes from dropped items and damage done while the bathroom was being fitted, across acrylic, cast iron enamel and whirlpool & spa baths.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Area
- Kingseat (AB21)
- Area hub
- Aberdeen
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Prices start from £95. We do not charge extra for travel to Kingseat. The price comes down to:
- The type of damage
- How many areas need work
- Where the damage is and how we get to it
- Doing more than one item at once
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
Photographing the damage takes a minute. Please include:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Details of any past repairs
- Daylight if possible, and no flash reflection
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Cracks in parts of an acrylic bath we can’t get to from below
- Wear across the entire surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
How to care for the repair
So the finish stays in good condition:
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
- Cover the bath during DIY or decorating
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Covering Kingseat
Kingseat is about 8 miles north of Aberdeen, in Aberdeen. We travel to homes and businesses in Kingseat, so nothing has to leave your home. Kingseat is one of 63 places in Aberdeen where we work.
Our technicians cover all of the AB21 postcode area and the streets around it. Streets in the area include Bacchante Way, Kingseat Avenue and Malcolm Crescent. Close by, we cover Whitecairns (1 mile south-east), Newmachar (1 mile west), Kinmundy (1 mile south-west), Corsehill (2 miles south) and Hill of Keir (3 miles east). We also work in nearby towns such as Aberdeen (8 miles south), Rosemount (8 miles south), Berryden (7 miles south), Ferryhill (9 miles south), New Aberdeen (8 miles south) and Dyce (4 miles south).
What’s near Kingseat
Our customers here include homes close to Newmachar Church and New Machar Primary School. Kingseat’s nearest station is Dyce station, about 4 miles south of the centre. A little further out are Kingseat Hospital (within half a mile north). Green spaces nearby include Corby Loch and Badgers' Hill.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
The process
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the following day.
Before we arrive
- Clear the area around the damage
- Open a window if you can
- Have somewhere for us to park nearby if possible
Ask for a price
Upload pictures of the damage and a wider shot of the entire item, and tell us you are in Kingseat, and we will reply with a fixed price.
Advice
Towns and villages near Kingseat
What else we do in Kingseat
Repair or replace in Kingseat?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why Kingseat clients choose us
- Same prices wherever you are
- One visit for most repairs
- Work done at your home or business
- Fixed prices from your pictures
Read our full price list and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
What we’re called out for in Kingseat
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
People normally call us when they notice something like this:
- Damage done while the bathroom was being fitted
- Chips on the rim or sides
- An old repair that has yellowed or come loose
- Rust spots around the plughole
Before booking anyone
- What the guarantee covers, and for how long
- Whether the price covers travel
- What aftercare is recommended
- When it can be used again
FAQs for Kingseat
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Do you work in Kingseat?
Yes. We cover the entire UK and travel to Kingseat and the rest of Aberdeen. Send pictures and we’ll quote, or call 0345 017 0787.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
About our accreditations · Every repair comes with a one-year guarantee.
