Aberdeen · Scotland
Bath re-enamelling & resurfacing in Kingseat, Aberdeen
Bath re-enamelling in Kingseat without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
Bath re-enamelling in Kingseat without replacing anything
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with a peeling or bubbling previous coating and lots of chips and rust spots, we can help, whatever the material.
Every repair is covered by our one-year guarantee.
- Area
- Kingseat (AB21)
- County
- Aberdeen
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Kingseat
Landlords, letting agents and housing providers in Kingseat use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Nearby places to Kingseat
What else we do in Kingseat
Aftercare tips
Simple care helps the repair last. Our advice:
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs straight away
- Get any chip repaired quickly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
FAQs for Kingseat
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the whole item and your postcode.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What happens after I send pictures?
We come back with a fixed quote, plus dates. There’s no obligation to book.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Kingseat and the surrounding area
Kingseat is about 8 miles north of Aberdeen, in Aberdeen. Jobs in Kingseat are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Kingseat is one of 63 places in Aberdeen where we work.
Every address in AB21 is covered. Jobs here include addresses on Bacchante Way, Kingseat Avenue and Malcolm Crescent. We also cover the places around Kingseat: Whitecairns (1 mile south-east), Newmachar (1 mile west), Kinmundy (1 mile south-west), Corsehill (2 miles south) and Hill of Keir (3 miles east). Larger places within reach include Aberdeen (8 miles south), Rosemount (8 miles south), Berryden (7 miles south), Ferryhill (9 miles south), New Aberdeen (8 miles south) and Dyce (4 miles south).
Near you in Kingseat
Locally, our jobs take us to homes close to Newmachar Church and New Machar Primary School. The closest station to Kingseat is Dyce station, about 4 miles south of the centre. Further afield, we also cover the area around Kingseat Hospital (within half a mile north). Green spaces nearby include Corby Loch and Badgers' Hill.
Common problems we fix in Kingseat
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- A roll-top that is seen better days
- A peeling or bubbling previous coating
What to look for in a quote
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
- How long it needs to cure
- What aftercare is recommended
When a repair isn’t the answer
We won’t take on work that will not last, so these are the limits:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The type of damage
- The material
- The size and number of damaged areas
- How many items we do on one visit
A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- Where you are, by postcode
- What it’s made of, if you know
- A clear, close picture of the problem area
- Any earlier repairs or coatings
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll say right away if a repair is the right fix.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
