Aberdeen · Scotland
Bath chip & crack repair in Dyce, Aberdeen
Our repair technicians come to Dyce for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- A kit repair that didn’t last
How we handle bath repair in Dyce
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can usually use the bath the following day. Whether it’s a cracked acrylic bath and impact holes in acrylic, we can typically put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Dyce (AB21, AB22)
- Region
- Aberdeen
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Do you need bath repair in Dyce?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Send us a picture if you notice any of these:
- Scratches you can feel with a fingernail
- Chips on the rim or sides
- A cracked acrylic bath
- Impact holes in acrylic
Before you book anyone
- What happens if they find more damage
- How soon you can use it again
- What preparation is included
- How to care for the finish
Prices and what affects them
Repairs from £95. There is no charge for travel to Dyce. The price comes down to:
- Access to the area
- Unusual colours or finishes
- The material and finish
- How many items we do on one visit
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Most quotes are done from photos alone. To make it quick:
- Any details about the material
- Something in shot to show the size
- A close-up of the damage, in focus
- A wider photo showing the entire bath
If you are in Dyce and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Nearby places to Dyce
More services for Dyce
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
When we’d advise against a repair
A repair isn’t right for every job, for example:
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Cover the bath during DIY or decorating
- Stick to mild cleaners and a soft cloth
- Make sure an acrylic bath is firm underfoot
- Do not leave a fresh chip for long
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Should you replace it?
A new bath brings a chain of other jobs: tiles along the rim usually crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- Same prices wherever you are
- We leave the room as we found it
- One-year guarantee on every repair
- Most jobs done in one visit
Take a look at our prices page or resurfacing vs replacement cost guide.
What we do, step by step
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Getting a price
Most clients in Dyce get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Your questions about bath repair in Dyce
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
When can I have a bath again?
Normally by the following day, depending on the repair.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What happens next?
We come back with a fixed quote, normally with dates to choose from. There is no obligation to book.
Do you cover Dyce?
We do. Technicians travel to Dyce from across the region, and the price is the same as everywhere else.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Covering Dyce
Dyce is about 4 miles north-west of Aberdeen, in Aberdeen. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Dyce is one of 63 places in Aberdeen where we work.
Jobs in AB21 and AB22 work the same way as everywhere else we cover. From Glen Road, Argyll Road and Walton Road or a nearby road, we can come to you. With the A947 close by, Dyce is simple for us to get to. We also cover the places around Dyce: Stoneywood (1 mile south), Newhills (2 miles south), Bucksburn (2 miles south), Corsehill (2 miles north-east) and Danestone (3 miles south-east). Larger places within reach include Aberdeen (4 miles south-east), Rosemount (5 miles south-east), Berryden (4 miles south-east), Ferryhill (6 miles south-east), New Aberdeen (5 miles south-east) and Tillydrone (4 miles south-east). Dyce is one of the larger places we cover in Aberdeen.
What’s near Dyce
In Dyce, that means homes near Dyce Academy. There’s a railway station in Dyce itself: Dyce station. A little further out are Woodend Hospital (3.8 miles south). Green spaces nearby include Badgers' Hill and Corby Loch.
About our accreditations · Every repair comes with a one-year guarantee.
