Somerset · England
Bath chip & crack repair in Kingweston, Somerset
We travel to Kingweston for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Rust spots around the plughole
- Deep scratches in acrylic
About our bath repair in Kingweston
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Whether it’s a chip where the taps sit and rust by the waste and overflow, we can help, on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding alike.
Big or small, it’s backed by a one-year guarantee.
- Area
- Kingweston (TA11)
- Area hub
- Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get any new chip repaired before it rusts
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Common problems we fix in Kingweston
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
It’s worth getting a quote if you see:
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
- A kit repair that didn’t last
- Damage beneath the taps
Before you book anyone
- The length of the guarantee and what it covers
- How changes to the job are handled
- How the colour is matched
- How to look after the finish
Prices and what affects them
Prices start from £95. There is no area surcharge for Kingweston. The price reflects:
- Where the damage is and how we get to it
- Whether we combine several jobs
- What the surface is made of
- The colour and finish to match
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Most quotes are done from pictures alone. To make it quick:
- A clear, close picture of the problem area
- A picture taken from further back
- What it’s made of, if you know
- Your postcode, so we can check dates
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We clean up when we are done and let you know when you can use it again.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the next day.
Preparing for the visit
- Ensure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Getting a price
Upload a photo of the damage and a wider shot of the whole item, and tell us you are in Kingweston, and we’ll come back with a fixed quote.
Advice
FAQs for Kingweston
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
What does bath repair cost?
Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
How long does the repair take to cure?
Typically the following day. We will tell you the exact curing time when we finish.
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Kingweston and nearby
Kingweston is about 9 miles north of Yeovil, in Somerset. Whether you are in the middle of Kingweston or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover 640 places in Somerset.
Every address in TA11 is covered. We regularly work on streets such as High Street and Kingweston Road and the roads around them. Being close to the B3153, Kingweston is simple for us to get to. Other places close to Kingweston include Barton St David (1 mile north-east), Plot Gate (1 mile north-east), Silver Street (1 mile north-east), Keinton Mandeville (1 mile east) and Charlton Mackrell (2 miles south). We also work in nearby towns such as Bridgwater (14 miles west), Yeovil (9 miles south), Wells (9 miles north), Shepton Mallet (9 miles north-east), Street (4 miles north-west) and Glastonbury (5 miles north).
What’s near Kingweston
Locally, our jobs take us to homes close to Church of All Saints and The Barton Inn. Open spaces near Kingweston include Glastonbury Tor.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details.
Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
When a repair isn’t the answer
Before booking, it’s worth knowing the limits:
- Leaking fittings, which need a plumber
- Wear across the entire surface, which needs re-enamelling
- A steel bath rusted through
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Kingweston
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Nearby places to Kingweston
What else we do in Kingweston
About our accreditations · Every repair comes with a one-year guarantee.
