Worcestershire · England
Bath chip & crack repair in Kinlet, Worcestershire
We travel to Kinlet for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Cracks in an acrylic bath
- Chips along the edge of the bath
Covering Kinlet
Kinlet is about 7 miles west of Kidderminster, in Worcestershire. We visit homes and businesses in Kinlet and nearby villages, so you do not need to take anything anywhere. Kinlet is one of 376 towns and villages in Worcestershire where we work. We work right across the region, from Kinlet to Birmingham (about 22 miles away).
Our visits in DY12 are booked in the same way as anywhere else. We regularly work on streets such as Blount Close, Little Stocks Close and Park Close and the roads around them. Neighbouring places we cover include Coppicegate (1 mile east), Netherton (2 miles north-east), Lower Chorley (2 miles north-west), Buttonoak (2 miles south-east) and Stanley (3 miles north-east). We also work in nearby towns such as Kidderminster (7 miles east), Droitwich Spa (15 miles south-east), Stourport-on-Severn (8 miles south-east), Bewdley (5 miles south-east), Chawson (15 miles south-east) and Comberton (8 miles east).
Around Kinlet
Around Kinlet, we work in homes near Kinlet CofE Primary School and Church of St John the Baptist. Other landmarks nearby include Crundles Farm (4.7 miles south-east).
How we handle bath repair in Kinlet
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. If you’re dealing with a cracked acrylic bath and a kit repair that didn’t last, we can normally put it right, on pressed steel enamel, cast iron enamel and whirlpool & spa baths alike.
All our work is covered by our one-year guarantee, wherever you are in Worcestershire.
- Where
- Kinlet (DY12)
- Area hub
- Worcestershire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Kinlet
Something went through my bath. Can it be fixed?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you cover the whole of Worcestershire?
All of Worcestershire, and the rest of the UK. Travel is included in the price.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Nearby places to Kinlet
Other services in Kinlet
What we cannot put right
In fairness, there are a few things a repair won’t fix:
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Landlords, agents and businesses in Kinlet
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Looking after it afterwards
How the surface is treated afterwards matters:
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse the bath after use, especially in hard water areas
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
What we are called out for in Kinlet
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
These are the problems we are asked about most:
- Chips caused by builders
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
- Scuffs and scratches in the surface
Before booking anyone
- What happens if the damage is worse than the photos show
- How soon you can use it again
- Who turns up on the day
- Whether there are any call-out or travel charges
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a morning or an afternoon. Before leaving, we tell you how long to leave it and how to look after it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
Get a quote
For a price in Kinlet, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
What affects the price in Kinlet
Prices start from £95. There’s no area surcharge for Kinlet. What changes the price is:
- Access to the area
- Unusual colours or finishes
- The material
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- What it’s made of, if you know
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
