North Yorkshire · England
Bath chip & crack repair in Kirkby Fleetham, North Yorkshire
Our repair technicians come to Kirkby Fleetham for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- Rusty patches near the plughole
How we handle bath repair in Kirkby Fleetham
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We work on acrylic, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are holes from dropped items and rust by the waste and overflow.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Kirkby Fleetham (DL7)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
For anyone letting property in or around Kirkby Fleetham, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A steel bath rusted through
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Kirkby Fleetham
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Prices and what affects them
Prices start from £95. There’s no area surcharge for Kirkby Fleetham. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- How hard the colour is to match
- Where the damage is and how we get to it
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- Any details about the material
The quickest way to a price is to send a couple of photos through our quote form or ring us. We will say straight away if a repair is the right fix.
Should you replace it?
Swapping a damaged bath for a new one generally means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Our bath repair starts from £95. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Dust sheets down, tidy finish
- Technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- Everything repaired in place
Take a look at our pricing and bath cost comparison.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours, depending on the damage from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the following day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Getting a price
For a price in Kirkby Fleetham, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
How to look after the repair
Aftercare is simple:
- Do not leave razors or cans standing in the bath
- If an acrylic bath flexes, have its feet adjusted
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Places near Kirkby Fleetham
More services for Kirkby Fleetham
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Covering Kirkby Fleetham
Kirkby Fleetham is about 5 miles west of Northallerton, in North Yorkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 626 places across North Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 37 miles away.
Jobs in DL7 are booked in the same way as anywhere else. That includes homes on Village Way, Kirkby Lane and Forge Lane and the roads around them. Neighbouring places we cover include Great Fencote (1 mile south), Little Fencote (1 mile south), Little Langton (2 miles east), Scruton (2 miles south-east) and Kiplin (2 miles north). Within a short drive, we also cover Ripon (15 miles south), Catterick Garrison (6 miles west), Northallerton (5 miles east), Richmond (8 miles north-west), Thirsk (12 miles south-east) and Colburn (5 miles north-west).
What’s near Kirkby Fleetham
Typical jobs here are in homes near St Andrew's and Kirkby Fleetham Church of England Primary School and the streets around them. Other landmarks nearby include Killerby Castle (1.8 miles north-west) and Friarage Hospital (5.4 miles east).
Questions from Kirkby Fleetham
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
What happens once I’ve sent photos?
You’ll get a fixed quote back. You are under no obligation.
Do you work in Kirkby Fleetham?
We do. Repair technicians travel to Kirkby Fleetham from across the region, and the price is the same as everywhere else.
Which areas do you work in?
We work UK-wide, and that includes Kirkby Fleetham. Prices do not change with location.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
