Dorset · England
Bath chip & crack repair in Knowlton, Dorset
Bath repair across Knowlton and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
Bath repair in Knowlton, done in place
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. We are frequently asked to fix deep scratches in acrylic and a chip where the taps sit, across roll-top & freestanding, whirlpool & spa baths and pressed steel enamel.
Every repair comes with our one-year guarantee, wherever you are in Dorset.
- Location
- Knowlton (BH21)
- Region
- Dorset
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:
- The material and finish
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The size and number of damaged areas
A repair is priced on what needs doing, not where you live. You will see the full price before you book.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Something in shot to show the size
- Daylight if possible, and no flash reflection
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the following day.
Preparing for the visit
- Open a window if you can
- Let us know about parking or access
- Ensure the area is dry
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
Keeping it looking good
Once the work has cured, treat it gently:
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep metal cans and razors off the surface
- Put a towel in the bath if you are working above it
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Do you need bath repair in Knowlton?
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.
People normally call us when they notice something like this:
- Rust spots around the plughole
- Hairline or through cracks in acrylic
- Impact holes in acrylic
- Scratches you can feel with a fingernail
What to look for in a quote
- What prep work is covered
- If travel is included in the price
- What happens if the damage is worse than the pictures show
- Who will actually do the work
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What a repair cannot fix
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- Cracks in acrylic we cannot reach from underneath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
Send us photos and we will tell you honestly before you book.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
About Knowlton
Knowlton is about 4 miles west of Verwood, in Dorset. Whether you are in the middle of Knowlton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 462 towns and villages in Dorset, from the larger towns to small villages.
Every address in BH21 is within our area, from the main roads to the quietest streets. If you’re just outside Knowlton, we cover Haythorne (2 miles south-east), Horton (2 miles south), Woodlands (2 miles south-east), Chalbury Common (2 miles south) and Whitmore (2 miles east). Within a short drive, we also cover Christchurch (14 miles south-east), Wimborne Minster (6 miles south), Blandford Forum (9 miles west), Verwood (4 miles east), Shaftesbury (12 miles north-west) and Ferndown (7 miles south-east).
Around Knowlton
Around Knowlton, we work in homes near Church of St Giles and Wimborne St Giles Church of England First School and Nursery, among other places. Well-known places in the area include Cranborne Castle Hill (2.6 miles north-east).
Your questions about bath repair in Knowlton
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you fix rust around the plughole?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
When can I have a bath again?
Normally within a day, though it depends on what we’ve done.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Also near Knowlton
Also in Knowlton
Should you replace it?
People often assume a cracked or chipped bath has to come out. Typically it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why Knowlton clients choose us
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
Take a look at our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
