Staffordshire · England

Bath chip & crack repair in Knutton, Staffordshire

Local bath repair for Knutton: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Rusty patches near the plughole
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Knutton

About our bath repair in Knutton

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. If you’re dealing with rusty patches near the plughole and damage beneath the taps, we can help, on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding alike.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Area
Knutton (ST5, ST55)
Area hub
Staffordshire
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

Where we work around Knutton

Knutton is about 1 mile west of Newcastle-under-Lyme, in Staffordshire. Wherever you are in the ST5 postcode area, a technician comes to you. We cover all 512 towns and villages in Staffordshire, from the larger towns to small villages. Our jobs stretch from Knutton to Manchester (about 32 miles away).

All of ST5 and ST55 is within our area. Whether you live on Oak Road, Moran Road and Church Lane or anywhere nearby, a technician can come to you. Other places close to Knutton include Newcastle-under-Lyme (1 mile east), Silverdale (1 mile west), Broad Meadow (1 mile north), Dimsdale (1 mile north-east) and May Bank (1 mile east). Further out, we also cover Longton (5 miles south-east), Stone (9 miles south-east), Leek (11 miles north-east), Biddulph (7 miles north-east), Alsager (6 miles north-west) and Kidsgrove (5 miles north).

Landmarks near Knutton

Our clients here include homes close to Blackfriars School, The Wine Vaults Public House and Knutton St Marys CofE Academy and the streets around them. Also close by are St. Mary's Church (less than half a mile west) and St John Fisher Catholic College (0.5 miles east). The nearest railway station is Longport station, roughly 2.1 miles north-east. Well-known places in the area include The Potteries Centre (3 miles east) and NHS North Staffordshire Clinical Commissioning Group (1 mile south-east). For a walk, there is Parrot's Drumble and Bignall Hill.

  • Parks and local facilities nearby include Audley and Bignall End (2.7 miles north-west)
Map of Knutton © OpenStreetMap contributors

Aftercare tips

Simple care helps the repair last. Our advice:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • If an acrylic bath flexes, have its feet adjusted
  • Don’t leave a fresh chip for long
  • Protect the bath with a towel when doing jobs nearby

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.

What your bath is made of matters

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

What bath repair costs

Repairs from £95. We do not charge extra for travel to Knutton. The price comes down to:

  • Whether it’s a chip, crack, burn or wear
  • How many areas need work
  • Where the damage is and how we get to it
  • Whether we combine several jobs

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

It only takes a minute to photograph the damage. Try to send:

  • Your postcode, so we can check dates
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • One picture of the whole bath

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and you are under no obligation.

Questions from Knutton

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Knutton.

Do you cover Knutton?

Yes. We cover the whole UK and come to Knutton and the rest of Staffordshire. Send pictures and we’ll quote, or call 0345 017 0787.

It’s been repaired before. Can you still fix it?

Normally, yes. We remove the old repair before doing a new one, so let us know about it.

Will the repair show?

We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.

Does someone need to be in?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

What we cannot put right

A repair is not right for every job, for example:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Acrylic cracks with no access behind them
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel

The process

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow two to three hours for most chips. Before leaving, we tell you when it can be used and how to look after it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area
  • Mention if the room is upstairs or in a flat

How to get a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Send photos for a quote

Read more

Repair or replace in Knutton?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why us?

  • A year’s guarantee on all work
  • Everything repaired in place
  • Colour mixed on the day to match
  • We’ll tell you if it’s not worth repairing

Read our full price list or bath cost comparison.

Signs you need bath repair in Knutton

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Signs it’s time to call us include:

  • A chipped rim or side
  • Chips caused by builders
  • A failed DIY repair that is discoloured or lifting
  • Scuffs and scratches in the surface

Questions to ask before booking

  • Who turns up on the day
  • How your room will be protected
  • Whether they match the colour on site
  • What aftercare is recommended

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.