Worcestershire · England
Bath Repair for Kyre homes
Bath repair in Kyre without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- Hairline or through cracks in acrylic
- A chipped rim or side
About our bath repair in Kyre
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Whether it’s a failed DIY repair that’s discoloured or lifting and snagging damage from a refit, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Kyre (WR15)
- County
- Worcestershire
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
We work for landlords, letting agents and housing providers in Kyre as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- How hard the colour is to match
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a few hours. Before we go, we’ll explain when it can be used and how to care for it.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the next day, the bath is ready to use.
Preparing for the visit
- Ensure the area is dry
- Clear the area around the damage
- Ensure the room can be ventilated
How to get a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
When we would advise against a repair
We will always be straight with you, so here’s what a repair won’t do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us photos and we’ll tell you honestly.
Materials we repair
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
Where we work around Kyre
Kyre is about 9 miles east of Leominster, in Worcestershire. Our repair technicians come to homes and businesses in Kyre and the surrounding area, so nothing has to leave your home. Kyre is one of 376 towns and villages in Worcestershire we cover. Our nearest city page is Birmingham, about 31 miles away.
Postcode districts we cover here: WR15. If you’re just outside Kyre, we cover Nineveh (1 mile north), Bank Street (1 mile south-east), Bockleton (2 miles south-west), Oldwood (3 miles north-west) and Grendon Green (4 miles south-west). Within a short drive, we also cover Worcester (15 miles east), Kidderminster (15 miles north-east), Great Malvern (14 miles south-east), Stourport-on-Severn (12 miles north-east), Bewdley (12 miles north-east) and Malvern (15 miles south-east).
Near you in Kyre
Locally, our jobs take us to homes close to Church of St Mary and the streets around them. Nearby you’ll also find Bromyard Community Hospital (5.9 miles south) and Laysters Motte (3.6 miles west). For a walk, there’s Page's Pasture.
FAQs for Kyre
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
How much does bath repair cost in Kyre?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item with your WR15 postcode.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we’ll plan for it.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you cover the whole of Worcestershire?
Across the UK. Prices don’t change with location.
Repairing versus replacing in Kyre
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. We charge the same wherever you are, so there’s no premium for Kyre. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Dust sheets down, tidy finish
- One visit for most repairs
- Fixed prices from your pictures
- Honest advice, even when it means no job
Take a look at our full price list or guide to resurfacing and replacement costs.
Also in Kyre
Signs you need bath repair in Kyre
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The things customers generally mention when they call are:
- Chips under the taps
- Rust spots around the plughole
- A failed DIY repair that’s discoloured or lifting
- Impact holes in acrylic
Comparing quotes
- Aftercare advice
- What happens if the damage is worse than the pictures show
- How the colour is matched
- What protection goes down before work starts
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Stick to mild cleaners and a soft cloth
- Get a dripping tap fixed promptly
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
About our accreditations · Every repair comes with a one-year guarantee.
