Cornwall · England
Bath Repair in Lamellion
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Lamellion, with a one-year guarantee on every repair.
- Repairs from £95
- Snagging damage from a refit
- A cracked acrylic bath
Signs you need bath repair in Lamellion
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Typical reasons for a call-out include:
- A chip where the taps sit
- Chips on the rim or sides
- Rust by the waste and overflow
- Chips caused by builders
Before booking anyone
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
- How soon you can use it again
- What happens if they find more damage
Bath repair in Lamellion without replacing anything
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Typical jobs include an old repair that has yellowed or come loose and deep scratches in acrylic, in cast iron enamel, whirlpool & spa baths and acrylic.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Lamellion (PL14)
- Region
- Cornwall
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price depends on:
- How hard the colour is to match
- Where the damage is and how we get to it
- How many items we do on one visit
- The material and finish
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
Phone photos are fine, there’s no need for anything special. Make sure they show:
- Any details about the material
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Our work in Lamellion
Lamellion is about 1 mile south-west of Liskeard, in Cornwall. Customers in Lamellion get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We work in all 644 towns and villages across Cornwall.
Postcode districts we cover here: PL14. That includes homes on Lang Road, Trevillis Park and Grove Park Court and the roads around them. Other places close to Lamellion include Moorswater (1 mile north-west), Liskeard (1 mile north-east), Addington (1 mile north-east), Trembraze (1 mile north-east) and Hendrabridge (2 miles north-east). Further out, we also cover Stonehouse (15 miles east), St Austell (15 miles south-west), Bodmin (11 miles west), Saltash (11 miles east), Launceston (14 miles north) and Sandy Bottom (15 miles south-west).
Landmarks near Lamellion
Typical jobs here are in homes near Liskeard School and Community College, Liskeard Hillfort Primary School and St Martin's Church. Lamellion has its own railway station: Liskeard station. A little further out are Caradon (0.6 miles north-east) and Stuart House (0.6 miles north-east). Open spaces near Lamellion include Caradon Hill.
Repair or replace: which is better?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Lamellion clients choose us
- Repair technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- Colour mixed on the day to match
See our prices page or resurfacing vs replacement cost guide.
Also near Lamellion
More services for Lamellion
Lamellion questions
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Are there extra charges for Lamellion?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Will the repair show?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Cracks in acrylic we can’t reach from underneath
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Landlord and trade work in Lamellion
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We clean up when we are done and tell you when it’s ready to use.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
Getting a price
To get a price, send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
