Cornwall · England
Bath Repair for Trembraze homes
Fixed-price bath repair in Trembraze and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips on the rim or sides
- Rusty patches near the plughole
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
How we handle bath repair in Trembraze
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on cast iron enamel, acrylic and whirlpool & spa baths, and people most frequently call us about chips under the taps and rust spots around the plughole.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Trembraze (PL14)
- Area hub
- Cornwall
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also in Trembraze
How we price bath repair
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- The colour and finish to match
- Where the damage is and how we get to it
- How much damage there is
- What kind of damage it is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Any details about the material
- A clear, close picture of the problem area
- Natural light rather than flash
- A wider photo showing the entire bath
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Check that an acrylic bath does not move when you stand in it
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
When a repair is not the answer
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- Acrylic cracks with no access behind them
Send us photos and we will tell you honestly before booking.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Trembraze and nearby
Trembraze is about 1 mile north of Addington, in Cornwall. Across the PL14 area, we come to you. Trembraze is one of 644 towns and villages in Cornwall where we work.
Jobs in PL14 work the same way as everywhere else we cover. From Kibble Road, Pippin Avenue and Craddock Avenue or anywhere nearby, we can come to you. If you are just outside Trembraze, we cover Addington (1 mile south), Hendrabridge (1 mile east), Liskeard (1 mile south-west), Merrymeet (1 mile east) and Lamellion (1 mile south-west). Larger places within reach include Stonehouse (14 miles south-east), Bodmin (12 miles west), Saltash (11 miles east), Launceston (13 miles north), Looe (7 miles south) and Torpoint (13 miles south-east).
Landmarks near Trembraze
Locally, our jobs take us to homes close to St Martin's Church, Liskeard School and Community College and The Barley Sheaf Public House and the streets around them. Trembraze’s nearest station is Liskeard station, roughly 1.3 miles south-west of the centre. Well-known places in the area include Liskeard and District Museum (0.7 miles south-west) and Caradon (0.9 miles south-west). For a walk, there is Caradon Hill.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Common problems we fix in Trembraze
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
The most common problems we’re called about are:
- Damage beneath the taps
- Cracks in an acrylic bath
- A failed DIY repair that’s discoloured or lifting
- Impact holes in acrylic
Comparing quotes
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- Whether the colour is mixed to match
- Aftercare advice
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Trembraze use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What happens on the day
Your technician turns up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the following day, the bath is ready to use.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Let us know which floor the room is on
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Questions from Trembraze
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
About our accreditations · Every repair comes with a one-year guarantee.
