Buckinghamshire · England
Bath chip & crack repair in Latimer, Buckinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Latimer and across Buckinghamshire. Send pictures for a free, fixed quote.
- Repairs from £95
- A kit repair that didn’t last
- Rusty patches near the plughole
Landlord and trade work in Latimer
Landlords, letting agents and housing providers in Latimer use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Bath repair in Latimer, done in place
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We’re frequently asked to fix chips under the taps and snagging damage from a refit, across pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.
Whatever the size of the job, it’s backed by a one-year guarantee in Latimer and across Buckinghamshire.
- Area
- Latimer (HP5)
- Region
- Buckinghamshire
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £95. We don’t charge extra for travel to Latimer. The price comes down to:
- Where the damage is and how we get to it
- The type of damage
- The colour and finish to match
- Whether old repairs or coatings need taking off
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Quotes from your photos
You can take the pictures on your phone. Make sure they show:
- One picture of the entire bath
- Something in shot to show the size
- The material, if you know it
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
When we would advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
If in doubt, send photos and we will say what we think.
Materials we work on in Latimer
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Looking after it afterwards
Once the work has cured, treat it gently:
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
- Give the bath a quick rinse after use
- Make sure an acrylic bath is firm underfoot
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
Nearby places to Latimer
What else we do in Latimer
Do you need bath repair in Latimer?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Look out for any of the following:
- Holes from dropped items
- Chips on the rim or sides
- Cracks in an acrylic bath
- Rust spots around the plughole
What to look for in a quote
- What happens if the damage is worse than the photos show
- Who turns up on the day
- What the guarantee covers, and for how long
- How the colour is matched
About Latimer
Latimer is about 2 miles east of Amersham, in Buckinghamshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 263 towns and villages across Buckinghamshire. Our jobs stretch from Latimer to London (about 23 miles away).
Postcode districts we cover here: HP5. Local streets include Spring Close, The Grove and The Ridings, all of which we cover. Nearby, we also work in Little Chalfont (1 mile south-west), Chenies (1 mile east), Flaunden (2 miles north-east), Belsize (2 miles north-east) and Chorleywood (3 miles south-east). Larger places within reach include Aylesbury (15 miles north-west), High Wycombe (9 miles south-west), Chesham (3 miles north-west), Marlow (12 miles south-west), Beaconsfield (6 miles south-west) and Chalfont St Peter (5 miles south).
Landmarks near Latimer
Typical jobs here are in homes near Church of St Mary Magdalene, Dr Challoner's High School and Little Chalfont Primary School, among other places. The nearest railway station is Chalfont & Latimer station, roughly 1 mile south. Nearby you’ll also find Amersham Hospital (3.1 miles south-west) and Amersham Fair Organ Museum (1.7 miles west). Open spaces near Latimer include Sarratt Bottom nature reserve.
Repair or replace in Latimer?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Latimer
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
- A fixed quote before booking
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page or guide to resurfacing and replacement costs.
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
How it works
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It normally takes two to three hours for most chips, and you’re welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
Get a quote
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Read more
Latimer questions
Is a holed acrylic bath repairable?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
How long does the repair take to cure?
Generally within a day, depending on the repair.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you work in Latimer?
Yes, we do. Technicians travel to Latimer from across the region, and the price is the same as everywhere else.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
About our accreditations · Every repair comes with a one-year guarantee.
