Hertfordshire · England
Bath Repair for Belsize homes
Local bath repair for Belsize: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Deep scratches in acrylic
- A chipped rim or side
Bath repair in Belsize without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the following day. You will not need a plumber or tiler, because the bath does not move. If you’re dealing with scuffs and scratches in the surface and chips on the rim or sides, we can typically put it right.
Big or small, it’s backed by a one-year guarantee.
- Area
- Belsize (WD3, WD4)
- County
- Hertfordshire
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Nothing complicated is needed:
- Keep metal cans and razors off the surface
- Keep abrasive pads and gritty cleaners away from the bath
- Clean with warm water and a mild detergent
- Rinse it down after each bath
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
What we’re called out for in Belsize
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Most people contact us after spotting one of these:
- Rust by the waste and overflow
- Impact holes in acrylic
- A kit repair that didn’t last
- A cracked acrylic bath
What your quote should include
- What preparation is included
- How to look after the finish
- What the guarantee covers, and for how long
- How the room is protected while they work
Also near Belsize
More services for Belsize
Repairing versus replacing in Belsize
Swapping a damaged bath for a new one typically means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Belsize. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- We come to you, anywhere in the UK
- Fixed prices from your photos
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
Read our pricing and guide to resurfacing and replacement costs.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Our work in Belsize
Belsize is about 3 miles north of Chorleywood, in Hertfordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Belsize is one of 381 places in Hertfordshire where we work. You can also see our page for London, about 22 miles away.
Here we cover the WD3 and WD4 postcode area. From Plough Lane, Bragmans Lane and Poles Hill or a nearby road, we can come to you. We also cover the places around Belsize: Flaunden (1 mile west), Chenies (2 miles south-west), Latimer (2 miles south-west), Chorleywood (3 miles south) and Little Chalfont (3 miles south-west). Within a short drive, we also cover Watford (5 miles south-east), Hemel Hempstead (4 miles north-east), St Albans (8 miles north-east), Welwyn Garden City (15 miles north-east), Harpenden (11 miles north-east) and Hatfield (12 miles east).
What’s near Belsize
Our clients here include homes close to Two Brewers Inn, Kings Langley School and Sarratt Church of England Primary School and the streets around them. Belsize’s nearest station is Kings Langley station, about 2.9 miles east. Well-known places in the area include Hemel Hempstead Hospital (4 miles north). Not far away are Sarratt Bottom nature reserve.
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a few hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Get a quote
If you’re in Belsize and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Questions from Belsize
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Hertfordshire.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
How invisible is a bath repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
Honest limits
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
