Telford and Wrekin · England
Bath Repair in Lawley
Our repair technicians come to Lawley for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips along the edge of the bath
- Rusty patches near the plughole
Honest limits
Before you book, it’s worth knowing the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
About our bath repair in Lawley
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Typical jobs include chips along the edge of the bath and deep scratches in acrylic, in whirlpool & spa baths, pressed steel enamel and cast iron enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Lawley (TF4, TF3, TF6)
- Area hub
- Telford and Wrekin
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Signs you need bath repair in Lawley
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
It’s worth getting a quote if you see:
- Cracks in an acrylic bath
- Chips on the rim or sides
- Damage beneath the taps
- An old repair that has yellowed or come loose
Questions to ask before you book
- A fixed quote, and whether VAT is included
- How long it needs to cure
- What prep work is covered
- The length of the guarantee and what it covers
FAQs for Lawley
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we will quote them together.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Do you come to Lawley?
Yes, we do. We send a technician to Lawley for every job, and the price is the same as everywhere else.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one.
How it works
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. You can expect it to take two to three hours for most chips, and we’ll tell you if anything changes.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the next day.
Getting ready for the visit
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
- Ensure the room can be ventilated
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Where we work around Lawley
Lawley is about 1 mile north-west of Dawley, in Telford and Wrekin. Our repair technicians come to clients in Lawley, so you don’t need to take anything anywhere. Lawley is one of 79 towns and villages in Telford and Wrekin where we work. You can also see our page for Birmingham, about 29 miles away.
Our visits in TF4, TF3 and TF6 work the same way as everywhere else we cover. We regularly work on streets such as Bray Lane, Grice Lane and Light Lane and the roads around them. Close by, we cover Arleston (1 mile north), Spring Village (1 mile south), Newdale (1 mile north-east), The Rock (1 mile north-east) and Dawley (1 mile south-east). Within a short drive, we also cover Newport (8 miles north-east), Priorslee (3 miles east), Stirchley (3 miles south-east), Dothill (3 miles north-west), Donnington Wood (3 miles north-east) and Trench (3 miles north-east).
Landmarks near Lawley
Locally, our jobs take us to homes close to Lawley Village Academy, The Bulls Head pub and Telford Town Park, among other places. Other local landmarks include The Telford Langley School (1.3 miles south-east) and Church of St John (under half a mile west). The closest station to Lawley is Telford Central station, about 2 miles east of the centre. Other landmarks nearby include Telford Shopping Centre (1.7 miles east) and Princess Royal Hospital (2.8 miles north). Not far away are The Ercall.
Landlord and trade work in Lawley
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Also in Lawley
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in one visit. Prices start from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- A fixed quote before booking
- Everything repaired in place
- CHAS and Constructionline accredited
- We leave the room as we found it
Read our pricing or guide to resurfacing and replacement costs.
Looking after it afterwards
How the surface is treated afterwards matters:
- Clean with warm water and a mild detergent
- Don’t scrub with anything abrasive
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath does not move when you stand in it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
