Sunderland · England

Bath chip & crack repair in Leamside, Sunderland

Bath repair for Leamside, without a refit. Get a fixed price from your pictures, then we come to you.

  • Repairs from £95
  • Snagging damage from a refit
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Leamside?

Aftercare tips

Simple care helps the repair last. We recommend:

  • Store metal items away from the bath
  • Fix dripping taps early to stop staining and limescale
  • Rinse the bath after use, especially in hard water areas
  • Put a towel in the bath if you’re working above it

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Bath repair in Leamside, done in place

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We are often asked to fix chips along the edge of the bath and scuffs and scratches in the surface, in whirlpool & spa baths, cast iron enamel and acrylic.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Area
Leamside (DH4)
Region
Sunderland
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Landlords, agents and businesses in Leamside

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

What we cannot put right

Before you book, it’s worth knowing the limits too:

  • Water coming from the waste or taps rather than the bath
  • Metal that has corroded all the way through
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Send us pictures and we will tell you honestly before booking.

What we work on

  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel

Covering Leamside

Leamside is about 2 miles west of Hetton-le-Hole, in Sunderland. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Leamside is one of 75 towns and villages in Sunderland we cover. We work right across the region, from Leamside to Newcastle upon Tyne (13 miles away).

Jobs in DH4 are booked in the same way as anywhere else. We regularly work on streets such as Station Road, Pithouse Lane and Adventure Lane. If you are just outside Leamside, we cover West Rainton (1 mile east), Great Lumley (2 miles north-west), Woodstone Village (2 miles north), Lumley Thicks (2 miles north) and Castle Dene (2 miles north-west). Further out, we also cover Sunderland (7 miles north-east), Washington (6 miles north), Houghton-le-Spring (3 miles north-east), Sunniside (8 miles north-east), Fulwell (9 miles north-east) and Hendon (8 miles north-east).

What’s near Leamside

Typical jobs here are in homes near West Rainton Primary School, Church of St Mary and Belmont Community School, among other places. Leamside’s nearest station is Durham station, about 3.6 miles south-west of the centre. A little further out are The Gates Shopping Centre (3.7 miles south-west) and Ankers House Museum (3.7 miles north-west). Open spaces near Leamside include Warden Law.

Map of Leamside © OpenStreetMap contributors

What happens on the day

We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the day after.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Mention any earlier repairs or resurfacing
  • Point us to the nearest place to park

Getting a price

For a price in Leamside, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Get a fixed quote

Read more

Leamside: your questions answered

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Sunderland.

Do the materials smell?

Expect a mild smell while we’re working that clears as it cures.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we’ll plan for it.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Is a repair better than a new one?

Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Can you redo an old repair?

Yes. We take out the old repair and do it properly. Mention it when you send photos.

How we price bath repair

Repairs from £95. There are no hourly rates or hidden extras. The price depends on:

  • Any earlier repairs that need removing first
  • How many items we do on one visit
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

How to get a fixed price

You can normally get a fixed price without us visiting. To make it quick:

  • A clear, close picture of the problem area
  • Something in shot to show the size
  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare

Email us a picture of the damage and a wider shot of the whole item, and tell us you are in Leamside, and we will come back with a fixed quote.

Repairing versus replacing in Leamside

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.

Why choose Surface Doctor in Leamside

  • We leave the room as we found it
  • Free fixed quotes from pictures
  • Everything repaired in place
  • We come to you, anywhere in the UK

Take a look at our prices page or resurfacing vs replacement cost guide.

Signs you need bath repair in Leamside

Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

Signs it’s time to call us include:

  • Chips under the taps
  • Scratches you can feel with a fingernail
  • Rusty patches near the plughole
  • Holes from dropped items

Comparing quotes

  • Whether the price is fixed and includes VAT
  • What preparation is included
  • How the room is protected while they work
  • How long it needs to cure

10 questions to ask before booking

Repairs by material

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.