Hampshire · England
Bath Repair in Leckford
Bath repair for Leckford, without a refit. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
Bath repair in Leckford, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. We work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are damage beneath the taps and scuffs and scratches in the surface.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Leckford (SO20)
- County
- Hampshire
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
Send us photos and we will tell you honestly.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
Questions from Leckford
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Is a cracked acrylic bath repairable?
Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you cover Leckford?
Yes, we do. Repair technicians travel to Leckford from across the region, with no extra charge for travel.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Get a dripping tap fixed promptly
- Protect the bath with a towel when doing jobs nearby
- Make sure an acrylic bath is firm underfoot
- Keep abrasive pads and gritty cleaners away from the bath
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- No need to remove anything
- One visit for most repairs
See our pricing or resurfacing vs replacement cost guide.
Covering Leckford
Leckford is about 5 miles south of Andover, in Hampshire. We travel to homes and businesses in Leckford and nearby villages, so nothing has to leave your home. We work in 683 places in Hampshire. We work right across the region, from Leckford to London (64 miles away).
Jobs in SO20 work the same way as everywhere else we cover. We also travel to Longstock (1 mile west), Fullerton (1 mile north), Cottonworth (1 mile north), Chilbolton (2 miles north-east) and Stockbridge (2 miles south-west). Larger places within reach include Winchester (8 miles south-east), Eastleigh (13 miles south-east), Andover (5 miles north), Totton (15 miles south), Chandler's Ford (11 miles south) and Romsey (10 miles south).
Local landmarks in Leckford
In Leckford, that means homes near Test Valley School, Longstock Park and Church of St Nicholas. Other landmarks nearby include Andover War Memorial Hospital (5.6 miles north). Not far away are Mill Lake.
How we price bath repair
Repairs from £95. There is no area surcharge for Leckford. The price reflects:
- Where the damage is and how we get to it
- How hard the colour is to match
- The type of damage
- The material and finish
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
You can take the photos on your phone. Ensure they show:
- Where you are, by postcode
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes two to three hours for most chips for most jobs. We leave the room clean and ready to use once it has cured.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let the surface dry out before the visit
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Signs you need bath repair in Leckford
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
Contact us if you’ve noticed any of these:
- Chips along the edge of the bath
- Cracks in an acrylic bath
- Impact holes in acrylic
- An old repair that has yellowed or come loose
Comparing quotes
- Aftercare advice
- Whether cleaning and preparation are in the price
- Whether a trained technician does the job
- What the guarantee covers, and for how long
Places near Leckford
What else we do in Leckford
About our accreditations · Every repair comes with a one-year guarantee.
