Buckinghamshire · England
Bath Repair for Lee Common homes
Damaged bath in Lee Common? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- A chipped rim or side
About our bath repair in Lee Common
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. We regularly repair cast iron enamel, acrylic and whirlpool & spa baths, and people most frequently call us about a cracked acrylic bath and a chip where the taps sit.
A one-year guarantee comes as standard.
- Area
- Lee Common (HP16)
- Area hub
- Buckinghamshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff:
- Have new chips seen to early
- Make sure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Protect the bath with a towel when doing jobs nearby
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Repair or replace in Lee Common?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
Why book with us
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- Everything repaired in place
See our pricing or resurfacing vs replacement cost guide.
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- How many areas need work
- Whether we combine several jobs
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
How the visit works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and the room is left clean and tidy.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, generally by the following day, the bath is ready to use.
Preparing for the visit
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
Get a quote
To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Read more
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
For landlords and businesses
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We work for landlords, letting agents and housing providers in Lee Common as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Covering Lee Common
Lee Common is about 3 miles west of Chesham, in Buckinghamshire. Jobs in Lee Common are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Our repair technicians cover 263 places across Buckinghamshire. Our jobs stretch from Lee Common to London (30 miles away).
We cover every part of the HP16 postcode area and the streets around it. Jobs here include addresses on Oxford Street, Prince's Lane and Cherry Tree Lane. Nearby, we also work in Ballinger Common (1 mile south-east), Swan Bottom (1 mile north-west), South Heath (1 mile south), Chartridge (2 miles east) and St Leonards (2 miles north). Further out, we also cover Aylesbury (8 miles north-west), High Wycombe (7 miles south), Chesham (3 miles east), Marlow (11 miles south), Amersham (5 miles south-east) and Beaconsfield (8 miles south).
Landmarks near Lee Common
Around Lee Common, we work in homes near Lee Common Church of England School, The Bugle pub and St Mary's, among other places. Lee Common’s nearest station is Great Missenden station, roughly 2 miles south-west of the centre. Nearby you’ll also find Chiltern Hospital (2.7 miles south) and Roald Dahl Museum and Story Centre (2 miles south-west). The countryside around Lee Common includes Sands Bank and Pavis Wood.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Common questions in Lee Common
Can you repair a crack in an acrylic bath?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Also near Lee Common
Other services in Lee Common
About our accreditations · Every repair comes with a one-year guarantee.
