Lincolnshire · England
Bath chip & crack repair in Leverton, Lincolnshire
We travel to Leverton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- A hole punched through by something heavy
About our bath repair in Leverton
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We regularly repair acrylic, cast iron enamel and pressed steel enamel, and the jobs we see most are damage beneath the taps and cracks in an acrylic bath.
All our work is covered by a one-year guarantee, wherever you are in Lincolnshire.
- Location
- Leverton (PE22)
- Region
- Lincolnshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Leverton questions
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you come to Leverton?
Yes, we do. Repair technicians travel to Leverton from across the region, and the price is the same as everywhere else.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
- Stick to mild cleaners and a soft cloth
- Keep metal cans and razors off the surface
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Work for landlords and builders
For anyone letting property in or around Leverton, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
How we price bath repair
Repairs from £95. There is no charge for travel to Leverton. The price comes down to:
- Doing more than one item at once
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- How many areas need work
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- The material, if you know it
- Details of any past repairs
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
What a repair can’t fix
A repair isn’t right for every job, including:
- Acrylic cracks with no access behind them
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Leverton and the surrounding area
Leverton is about 5 miles north-east of Boston, in Lincolnshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Leverton is one of 732 places in Lincolnshire where we work.
Jobs in PE22 are booked in the same way as anywhere else. From Lacey's Drive, Lacey's Avenue and Lacey's Lane or a nearby road, a technician can come to you. Neighbouring places we cover include West End (1 mile south-west), Old Leake (2 miles north), Leake Commonside (3 miles north), Hilldyke (3 miles west) and High Ferry (3 miles north-west). Larger places within reach include Boston (5 miles south-west), Skegness (14 miles north-east), Holbeach (14 miles south), Witham (5 miles west), Long Sutton (15 miles south) and Staniland (5 miles south-west).
Around Leverton
In Leverton, that means homes near Church of St Helen and The Giles Academy, among other places. Nearby you’ll also find We'll Meet Again Homefront Museum (3.3 miles south) and Pilgrim Hospital (4 miles west). Not far away are Freiston Shore RSPB reserve.
Common problems we fix in Leverton
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- Damage beneath the taps
- A chipped rim or side
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
What to look for in a quote
- Whether there are any call-out or travel charges
- Who will actually do the work
- What happens if the damage is worse than the pictures show
- How long the guarantee is and what it covers
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Nearby places to Leverton
Other services in Leverton
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Ensure the room can be ventilated
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
How to get a price
Upload pictures of the damage and a wider shot of the entire item, with your PE22 postcode, and we will come back with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
