Warwickshire · England
Bath Repair for Lighthorne homes
We travel to Lighthorne for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- Holes from dropped items
Where we work around Lighthorne
Lighthorne is about 6 miles south-east of Warwick, in Warwickshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Lighthorne is one of 324 towns and villages in Warwickshire we cover. We work right across the region, from Lighthorne to Birmingham (25 miles away).
Our repair technicians cover all of CV35. Whether you live on Post Office Lane, Mountford Rise and The Bank or a nearby road, a technician can come to you. We also travel to Compton Verney (2 miles south-west), Kineton (3 miles south), Combrook (3 miles south-west), Little Kineton (3 miles south) and Walton (4 miles south-west). Within a short drive, we also cover Warwick (6 miles north-west), Royal Leamington Spa (6 miles north), Stratford-upon-Avon (9 miles west), Leamington Spa (7 miles north), Kenilworth (10 miles north) and Southam (6 miles north-east).
Local landmarks in Lighthorne
Our clients here include homes close to Lighthorne Heath Primary School and Church of St Lawrence and the streets around them. A little further out are Royal Leamington Spa Rehabilitation Hospital (5 miles north) and British Motor Museum (1.3 miles south-east). Green spaces nearby include Harbury Spoilbank.
How we handle bath repair in Lighthorne
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We regularly repair pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and common reasons people get in touch are cracks in an acrylic bath and a failed DIY repair that’s discoloured or lifting.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Lighthorne (CV35)
- Area hub
- Warwickshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Cracks in acrylic we can’t reach from underneath
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
What we’re called out for in Lighthorne
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
These are the problems we’re asked about most:
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
- An old repair that has yellowed or come loose
What to look for in a quote
- Whether a trained technician does the job
- Whether the colour is mixed to match
- What happens if they find more damage
- The length of the guarantee and what it covers
Landlords, agents and businesses in Lighthorne
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
For anyone letting property in or around Lighthorne, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
Questions from Lighthorne
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Can you repair a crack in an acrylic bath?
Generally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Why book with us
- No need to remove anything
- Technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
Read our pricing or bath cost comparison.
Nearby places to Lighthorne
Other services in Lighthorne
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It generally takes a morning or an afternoon, and you are welcome to carry on with your day while we work.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
How to get a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
- Do not leave a fresh chip for long
- Do not leave razors or cans standing in the bath
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
About our accreditations · Every repair comes with a one-year guarantee.
