Surrey · England
Bath Repair in Lightwater
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Lightwater, with a one-year guarantee on every repair.
- Repairs from £95
- Holes from dropped items
- Rust spots around the plughole
Common questions in Lightwater
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you work in Lightwater?
Yes, we do. Technicians travel to Lightwater from across the region, and the price is the same as everywhere else.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
How do I get a price for bath repair in Lightwater?
Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item with your GU18 postcode.
Bath repair in Lightwater, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the following day. Typical jobs include chips along the edge of the bath and damage beneath the taps, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- Lightwater (GU18, GU19)
- County
- Surrey
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. Prices are worked out job by job. What matters most is:
- The type of damage
- How much damage there is
- What the surface is made of
- Unusual colours or finishes
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- Any earlier repairs or coatings
- The material, if you know it
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
What we are called out for in Lightwater
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Common reasons people in Lightwater contact us are:
- A cracked acrylic bath
- Snagging damage from a refit
- A chipped rim or side
- A hole punched through by something heavy
What your quote should include
- Whether the price covers travel
- What happens if they find more damage
- A fixed quote, and whether VAT is included
- Whether a trained technician does the job
Towns and villages near Lightwater
More services for Lightwater
Covering Lightwater
Lightwater is about 3 miles east of Camberley, in Surrey. Anywhere in GU18, we carry out the work at your property. We cover all 395 towns and villages across Surrey. You can also see our page for London, about 27 miles away.
All of GU18 and GU19 is covered, from the main roads to the quietest streets. That includes homes on Ambleside Road, Ridgeway Close and Shrublands Drive and the roads around them. If you’re just outside Lightwater, we cover Donkey Town (1 mile south-east), Bagshot (1 mile north-west), Windlesham (1 mile north-east), Lucas Green (2 miles south-east) and West End (2 miles south-east). Within a short drive, we also cover Guildford (8 miles south-east), Woking (5 miles south-east), Camberley (3 miles west), Farnham (11 miles south-west), Egham (8 miles north-east) and Walton-on-Thames (12 miles east).
What’s near Lightwater
Around Lightwater, we work in homes near Hammond School, Brentmoor Heath and All Saints and the streets around them. Lightwater’s nearest station is Bagshot station, roughly 1.3 miles north-west of the centre. Well-known places in the area include Brookwood Hospital (3.3 miles south-east) and The Museum of The National Rifle Association (2.7 miles south). For a walk, there’s Brookwood Lye.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the next day, the bath is ready to use.
Preparing for the visit
- Let us know if it has been repaired before
- Let the surface dry out before the visit
- Let us know about parking or access
Getting a price
Send us pictures of the damage and a wider shot of the whole item, with your GU18 postcode, and we will come back with a fixed quote.
Read more
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
If you manage property in Lightwater, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Repair or replace: which is better?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- We’ll tell you if it’s not worth repairing
- Fixed prices from your pictures
- We leave the room as we found it
- Usually one visit, start to finish
Read our pricing or resurfacing vs replacement cost guide.
What we cannot put right
Some jobs are not right for a repair, for example:
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
- Water coming from the waste or taps rather than the bath
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Lightwater
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
