Moray · Scotland

Bath Repair for Lintmill homes

Fixed-price bath repair in Lintmill and the surrounding area, typically in one visit and guaranteed for a year.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Lintmill?

What we cannot put right

Not everything can be repaired, and we would rather say so up front. We can’t fix:

  • Water coming from the waste or taps rather than the bath
  • Rust that has eaten right through a steel bath
  • A bath that moves underfoot, until its support is fixed

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Lintmill

  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

Bath repair at your home in Lintmill

A typical bath repair is a few hours’ work, and the bath is back in use the next day. You won’t need a plumber or tiler, because nothing is disconnected. If you’re dealing with scratches you can feel with a fingernail and chips under the taps, we can help.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Location
Lintmill (AB56)
Region
Moray
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

What affects the price in Lintmill

Prices start from £95. There are no hourly rates or hidden extras. The price depends on:

  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas

The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.

How to get a fixed price

Phone pictures are fine, there’s no need for anything special. Just make sure we can see:

  • Any details about the material
  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit
  • A wider photo showing the whole bath

To get a price, send two or three photos using our quote form or call us. We will say immediately if a repair is the right fix.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

How to prepare

  • Let us know about parking or access
  • Ensure the area is dry
  • Move bottles, mats and clutter away from the area

How to get a price

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Send pictures for a quote

Related advice

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.

Landlord and trade work in Lintmill

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Keeping it looking good

Nothing complicated is needed:

  • Get a dripping tap fixed promptly
  • Rinse it down after each bath
  • Keep metal cans and razors off the surface
  • Ensure an acrylic bath is firm underfoot

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.

Your questions about bath repair in Lintmill

Do you repair coloured baths?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Can you price it without visiting?

Generally, yes. A close-up and a wider photo are enough to give a fixed quote.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Do you cover the whole of Moray?

We work UK-wide, so Lintmill is covered. Our prices are the same everywhere.

It’s been repaired before. Can you still fix it?

Yes, we often do. Removing the old work can add time, and that’s in the quote.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Can I add another job to the visit?

Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.

Lintmill and the surrounding area

Lintmill is about 6 miles east of Buckie, in Moray. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 58 towns and villages across Moray.

We work across AB56. We also cover the places around Lintmill: Cullen (1 mile north), Sandend (2 miles east), Portknockie (3 miles north-west), Fordyce (3 miles east) and Findochty (4 miles north-west). We also work in nearby towns such as Buckie (6 miles west), Keith (11 miles south-west), Fochabers (11 miles south-west), Ianstown (5 miles west), Lhanbryde (15 miles west) and Portessie (5 miles west). If you’re somewhere remote, call first so we can plan the visit.

Near you in Lintmill

Typical jobs here are in homes near St Mary's Collegiate Church, among other places. A little further out are Campbell Hospital (4.2 miles east) and castle 30m NNW of Inaltry (1.5 miles south). Green spaces nearby include Durn Hill.

Map of Lintmill © OpenStreetMap contributors

Repair or replace in Lintmill?

Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why book with us

  • Colours mixed by hand to suit your surface
  • Straight answers about what a repair can do
  • A year’s guarantee on all work
  • Most jobs done in one visit

Read our prices page and resurfacing vs replacement cost guide.

When to call us in Lintmill

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.

You may need us if you’ve spotted any of these:

  • Chips caused by builders
  • A hole punched through by something heavy
  • Deep scratches in acrylic
  • A failed DIY repair that’s discoloured or lifting

What to look for in a quote

  • Aftercare advice
  • Is the price fixed, and does it include VAT?
  • How soon you can use it again
  • What happens if they find more damage

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.