Hampshire · England

Bath chip & crack repair in Liphook, Hampshire

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Liphook, with a one-year guarantee on every repair.

  • Repairs from £95
  • Rust spots around the plughole
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Liphook

Questions from Liphook

Is a holed acrylic bath repairable?

Typically. Send us a picture of the hole and one from under the bath if you can.

Can you redo an old repair?

Yes. We take out the old repair and do it properly. Mention it when you send photos.

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. If there is more, we will tell you before starting.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Is there any odour?

Expect a mild smell while we’re working.

Will the repair show?

On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

About our bath repair in Liphook

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. If you are dealing with a hole punched through by something heavy and a chipped rim or side, we can usually put it right, whatever the material.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Location
Liphook (GU30)
Area hub
Hampshire
Cover
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Honest limits

Before booking, it’s worth knowing the limits:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Wear across the whole surface, which needs re-enamelling

If in doubt, send pictures and we’ll say what we think before booking.

Materials we repair

  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel

Landlords, agents and businesses in Liphook

We work for landlords, letting agents and housing providers in Liphook as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.

We regularly work with letting and managing agents. Send the address, photos and access details.

Repair or replace: which is better?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

What you get with us

  • CHAS and Constructionline accredited
  • Every repair guaranteed for a year
  • Work done at your home or business
  • Fixed prices from your pictures

Read our prices page or guide to resurfacing and replacement costs.

Covering Liphook

Liphook is about 8 miles north-east of Petersfield, in Hampshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Liphook is one of 683 places in Hampshire where we work. Our jobs stretch from Liphook to London (about 42 miles away).

Here we cover the GU30 postcode area. You’ll find streets such as London Road, Station Road and Childerstone Close, all of which we cover. We also travel to Weavers Down (1 mile west), Conford (1 mile north-west), Passfield (2 miles north-west), Milland (3 miles south) and Longmoor (3 miles west). Larger places within reach include Farnborough (15 miles north), Fleet (14 miles north), Horndean (15 miles south-west), Aldershot (12 miles north), Alton (9 miles north-west) and Petersfield (8 miles south-west).

Near you in Liphook

We visit homes around St Mary's Church Centre, The Green Dragon Public House and Bohunt School, among other places. Liphook’s nearest station is Liphook station, roughly 0.5 miles south of the centre. Other landmarks nearby include Chase Community Hospital (3.3 miles north-west). Green spaces nearby include Lynchmere Commons and Wheeler's Down.

Map of Liphook © OpenStreetMap contributors

How the visit works

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Make sure the area is dry
  • Keep pets and children out of the room while we work
  • Let us know if it has been repaired before

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.

Get a free quote

Read more

Do you need bath repair in Liphook?

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

Most people get in touch after spotting one of these:

  • Chips along the edge of the bath
  • Damage done while the bathroom was being fitted
  • Holes from dropped items
  • Hairline or through cracks in acrylic

Before you book anyone

  • What aftercare is recommended
  • What protection goes down before work starts
  • When it can be used again
  • What preparation is included

Our hiring checklist

Aftercare tips

Most damage we see is avoidable. These habits help:

  • Rinse it down after each bath
  • Have new chips seen to early
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Get a dripping tap fixed promptly

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.